>>> Building on exopi-1 under textproc/py-jellyfish BDEPENDS = [lang/rust;devel/maturin;devel/py-build;lang/python/3;devel/py-installer;devel/cargo-generate-vendor] DIST = [x11/gnome/librsvg:cargo/itoa-1.0.15.tar.gz;textproc/py-jellyfish:jellyfish-1.2.1.tar.gz;x11/gnome/librsvg:cargo/serde_core-1.0.228.tar.gz;x11/gnome/librsvg:cargo/once_cell-1.21.3.tar.gz;devel/py-libcst:cargo/pyo3-ffi-0.26.0.tar.gz;devel/cargo-audit:cargo/unicode-normalization-0.1.24.tar.gz;x11/gnome/librsvg:cargo/zerocopy-0.8.27.tar.gz;shells/fish/main:cargo/cc-1.2.41.tar.gz;x11/gnome/librsvg:cargo/version_check-0.9.5.tar.gz;devel/difftastic:cargo/proc-macro2-1.0.101.tar.gz;x11/gnome/librsvg:cargo/serde-1.0.228.tar.gz;devel/ruff:cargo/csv-core-0.1.12.tar.gz;x11/gnome/librsvg:cargo/ahash-0.8.12.tar.gz;devel/py-libcst:cargo/pyo3-0.26.0.tar.gz;devel/py-libcst:cargo/pyo3-macros-0.26.0.tar.gz;devel/difftastic:cargo/syn-2.0.106.tar.gz;x11/gnome/librsvg:cargo/shlex-1.3.0.tar.gz;devel/uv:cargo/csv-1.3.1.tar.gz;x11/gnome/librsvg:cargo/quote-1.0.41.tar.gz;devel/cargo-c:cargo/memoffset-0.9.1.tar.gz;x11/gnome/librsvg:cargo/autocfg-1.5.0.tar.gz;devel/py-libcst:cargo/pyo3-build-config-0.26.0.tar.gz;devel/py-dulwich:cargo/indoc-2.0.6.tar.gz;x11/gnome/librsvg:cargo/r-efi-5.3.0.tar.gz;x11/gnome/librsvg:cargo/libc-0.2.177.tar.gz;devel/py-dulwich:cargo/unindent-0.2.4.tar.gz;x11/gnome/librsvg:cargo/tinyvec-1.10.0.tar.gz;x11/gnome/librsvg:cargo/target-lexicon-0.13.3.tar.gz;x11/gnome/librsvg:cargo/serde_derive-1.0.228.tar.gz;devel/py-libcst:cargo/pyo3-macros-backend-0.26.0.tar.gz;x11/gnome/librsvg:cargo/smallvec-1.15.1.tar.gz;audio/ncspot:cargo/unicode-segmentation-1.12.0.tar.gz;net/routinator:cargo/unicode-ident-1.0.19.tar.gz;devel/ruff:cargo/cfg-if-1.0.3.tar.gz;x11/gnome/librsvg:cargo/heck-0.5.0.tar.gz;devel/py-pydantic-core:cargo/python3-dll-a-0.2.14.tar.gz;x11/gnome/librsvg:cargo/ryu-1.0.20.tar.gz;devel/sccache:cargo/wasi-0.14.7+wasi-0.2.4.tar.gz;x11/gnome/librsvg:cargo/zerocopy-derive-0.8.27.tar.gz;x11/gnome/librsvg:cargo/tinyvec_macros-0.1.1.tar.gz;x11/gnome/librsvg:cargo/wit-bindgen-0.46.0.tar.gz;x11/gnome/librsvg:cargo/memchr-2.7.6.tar.gz;x11/gnome/librsvg:cargo/num-traits-0.2.19.tar.gz;devel/cbindgen:cargo/getrandom-0.3.3.tar.gz;x11/gnome/librsvg:cargo/portable-atomic-1.11.1.tar.gz;x11/gnome/librsvg:cargo/wasip2-1.0.1+wasi-0.2.4.tar.gz;x11/gnome/librsvg:cargo/find-msvc-tools-0.1.4.tar.gz] FULLPKGNAME = py3-jellyfish-1.2.1 RDEPENDS = [lang/python/3] (Junk lock obtained for exopi-1 at 1767863663.18) >>> Running depends in textproc/py-jellyfish at 1767863663.22 last junk was in devel/kf6/knotifyconfig /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 rust-1.92.0 was: /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 python-3.13.11p0 rust-1.92.0 /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 rust-1.92.0 >>> Running show-prepare-results in textproc/py-jellyfish at 1767863667.82 ===> textproc/py-jellyfish ===> Building from scratch py3-jellyfish-1.2.1 ===> py3-jellyfish-1.2.1 depends on: python->=3.13,<3.14 -> python-3.13.11p0 ===> py3-jellyfish-1.2.1 depends on: py3-build-* -> py3-build-1.3.0 ===> py3-jellyfish-1.2.1 depends on: py3-installer-* -> py3-installer-0.7.0p2 ===> py3-jellyfish-1.2.1 depends on: maturin-* -> maturin-1.9.6 ===> py3-jellyfish-1.2.1 depends on: cargo-generate-vendor-* -> cargo-generate-vendor-1.0p1 ===> py3-jellyfish-1.2.1 depends on: rust-* -> rust-1.92.0 ===> Verifying specs: c pthread c++abi ===> found c.102.2 pthread.28.1 c++abi.9.0 cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 python-3.13.11p0 rust-1.92.0 (Junk lock released for exopi-1 at 1767863669.26) distfiles size=5896450 >>> Running patch in textproc/py-jellyfish at 1767863669.30 ===> textproc/py-jellyfish ===> Checking files for py3-jellyfish-1.2.1 `/exopi-cvs/ports/distfiles/jellyfish-1.2.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/ahash-0.8.12.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/autocfg-1.5.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/cc-1.2.41.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/cfg-if-1.0.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/csv-1.3.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/csv-core-0.1.12.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/find-msvc-tools-0.1.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/getrandom-0.3.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/heck-0.5.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/indoc-2.0.6.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/itoa-1.0.15.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/libc-0.2.177.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/memchr-2.7.6.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/memoffset-0.9.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/num-traits-0.2.19.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/once_cell-1.21.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/portable-atomic-1.11.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/proc-macro2-1.0.101.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-build-config-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-ffi-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-macros-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-macros-backend-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/python3-dll-a-0.2.14.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/quote-1.0.41.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/r-efi-5.3.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/ryu-1.0.20.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde-1.0.228.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde_core-1.0.228.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde_derive-1.0.228.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/shlex-1.3.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/smallvec-1.15.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/syn-2.0.106.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/target-lexicon-0.13.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/tinyvec-1.10.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/tinyvec_macros-0.1.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-ident-1.0.19.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-normalization-0.1.24.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-segmentation-1.12.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unindent-0.2.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/version_check-0.9.5.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wasi-0.14.7+wasi-0.2.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wasip2-1.0.1+wasi-0.2.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wit-bindgen-0.46.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/zerocopy-0.8.27.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/zerocopy-derive-0.8.27.tar.gz' is up to date. >> (SHA256) all files: OK ===> Extracting for py3-jellyfish-1.2.1 [modcargo] moving crates to /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates ===> Patching for py3-jellyfish-1.2.1 ===> Applying OpenBSD patch patch-pyproject_toml Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: pyproject.toml |--- pyproject.toml.orig |+++ pyproject.toml -------------------------- Patching file pyproject.toml using Plan A... Hunk #1 succeeded at 4. done ===> Compiler link: clang -> /usr/bin/clang ===> Compiler link: clang++ -> /usr/bin/clang++ ===> Compiler link: cc -> /usr/bin/cc ===> Compiler link: c++ -> /usr/bin/c++ [modcargo] Generating metadata for ahash-0.8.12 [modcargo] Generating metadata for autocfg-1.5.0 [modcargo] Generating metadata for cc-1.2.41 [modcargo] Generating metadata for cfg-if-1.0.3 [modcargo] Generating metadata for csv-1.3.1 [modcargo] Generating metadata for csv-core-0.1.12 [modcargo] Generating metadata for find-msvc-tools-0.1.4 [modcargo] Generating metadata for getrandom-0.3.3 [modcargo] Generating metadata for heck-0.5.0 [modcargo] Generating metadata for indoc-2.0.6 [modcargo] Generating metadata for itoa-1.0.15 [modcargo] Generating metadata for libc-0.2.177 [modcargo] Generating metadata for memchr-2.7.6 [modcargo] Generating metadata for memoffset-0.9.1 [modcargo] Generating metadata for num-traits-0.2.19 [modcargo] Generating metadata for once_cell-1.21.3 [modcargo] Generating metadata for portable-atomic-1.11.1 [modcargo] Generating metadata for proc-macro2-1.0.101 [modcargo] Generating metadata for pyo3-0.26.0 [modcargo] Generating metadata for pyo3-build-config-0.26.0 [modcargo] Generating metadata for pyo3-ffi-0.26.0 [modcargo] Generating metadata for pyo3-macros-0.26.0 [modcargo] Generating metadata for pyo3-macros-backend-0.26.0 [modcargo] Generating metadata for python3-dll-a-0.2.14 [modcargo] Generating metadata for quote-1.0.41 [modcargo] Generating metadata for r-efi-5.3.0 [modcargo] Generating metadata for ryu-1.0.20 [modcargo] Generating metadata for serde-1.0.228 [modcargo] Generating metadata for serde_core-1.0.228 [modcargo] Generating metadata for serde_derive-1.0.228 [modcargo] Generating metadata for shlex-1.3.0 [modcargo] Generating metadata for smallvec-1.15.1 [modcargo] Generating metadata for syn-2.0.106 [modcargo] Generating metadata for target-lexicon-0.13.3 [modcargo] Generating metadata for tinyvec-1.10.0 [modcargo] Generating metadata for tinyvec_macros-0.1.1 [modcargo] Generating metadata for unicode-ident-1.0.19 [modcargo] Generating metadata for unicode-normalization-0.1.24 [modcargo] Generating metadata for unicode-segmentation-1.12.0 [modcargo] Generating metadata for unindent-0.2.4 [modcargo] Generating metadata for version_check-0.9.5 [modcargo] Generating metadata for wasi-0.14.7+wasi-0.2.4 [modcargo] Generating metadata for wasip2-1.0.1+wasi-0.2.4 [modcargo] Generating metadata for wit-bindgen-0.46.0 [modcargo] Generating metadata for zerocopy-0.8.27 [modcargo] Generating metadata for zerocopy-derive-0.8.27 >>> Running configure in textproc/py-jellyfish at 1767863675.01 ===> textproc/py-jellyfish ===> Generating configure for py3-jellyfish-1.2.1 ===> Configuring for py3-jellyfish-1.2.1 /usr/bin/perl /exopi-cvs/ports/infrastructure/bin/pkg_subst -DMODPY_PYCACHE=__pycache__/ -DMODPY_ABI3SO=.abi3 -DMODPY_PYC_MAGIC_TAG=cpython-313. -DMODPY_BIN=/usr/local/bin/python3.13 -DMODPY_DISTV=1.2.1 -DMODPY_VERSION=3.13 -DMODPY_PY_PREFIX=py3- -DMODPY_PYOEXTENSION=opt-1.pyc -DARCH=amd64 -DBASE_PKGPATH=textproc/py-jellyfish -DFLAVOR_EXT= -DFULLPKGNAME=py3-jellyfish-1.2.1 -DHOMEPAGE=https://jamesturk.github.io/jellyfish/ -DLOCALBASE=/usr/local -DLOCALSTATEDIR=/var -DMACHINE_ARCH=amd64 -DMAINTAINER=Daniel\ Dickman\ \ -DPREFIX=/usr/local -DRCDIR=/etc/rc.d -DSYSCONFDIR=/etc -DTRUEPREFIX=/usr/local -DX11BASE=/usr/X11R6 -DPKGSTEM=py3-jellyfish -i -B /exopi-obj/pobj/py-jellyfish-1.2.1 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/pyproject.toml >>> Running build in textproc/py-jellyfish at 1767863675.58 ===> textproc/py-jellyfish ===> Building for py3-jellyfish-1.2.1 ⚠️ Warning: `project.dynamic` must not specify `version` when `project.version` is present in pyproject.toml 📦 Including license file `LICENSE` 🍹 Building a mixed python/rust project 🔗 Found pyo3 bindings 🐍 Found CPython 3.13 at /usr/local/bin/python3 📡 Using build options features from pyproject.toml warning: `panic` setting is ignored for `bench` profile Compiling target-lexicon v0.13.3 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/target-lexicon-0.13.3/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("arch_z80", "arch_zkasm", "default", "serde", "serde_support", "std"))' -C metadata=e5fbefb1359c922d -C extra-filename=-246eaf8e25d78acd --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/target-lexicon-246eaf8e25d78acd -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/target-lexicon-246eaf8e25d78acd/build-script-build` Running `/usr/local/bin/rustc --crate-name target_lexicon --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/target-lexicon-0.13.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("arch_z80", "arch_zkasm", "default", "serde", "serde_support", "std"))' -C metadata=2267b8c520f4b96d -C extra-filename=-c6d43e46f06b1ff0 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg 'feature="rust_1_40"'` Compiling python3-dll-a v0.2.14 Running `/usr/local/bin/rustc --crate-name python3_dll_a --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/python3-dll-a-0.2.14/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=d5cfc33745ba1d80 -C extra-filename=-655331998df1e1c1 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling pyo3-build-config v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-build-config-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="python3-dll-a"' --cfg 'feature="resolve-config"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "python3-dll-a", "resolve-config"))' -C metadata=ed21f798d162afe1 -C extra-filename=-7f3da7bf618ece5b --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-build-config-7f3da7bf618ece5b -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern python3_dll_a=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpython3_dll_a-655331998df1e1c1.rlib --extern target_lexicon=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtarget_lexicon-c6d43e46f06b1ff0.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-build-config-7f3da7bf618ece5b/build-script-build` Running `/usr/local/bin/rustc --crate-name pyo3_build_config --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-build-config-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="python3-dll-a"' --cfg 'feature="resolve-config"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "python3-dll-a", "resolve-config"))' -C metadata=e8f0c7f0806907e5 -C extra-filename=-90c27465f53dfea3 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern python3_dll_a=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpython3_dll_a-655331998df1e1c1.rmeta --extern target_lexicon=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtarget_lexicon-c6d43e46f06b1ff0.rmeta --cap-lints allow` Compiling proc-macro2 v1.0.101 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/proc-macro2-1.0.101/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "nightly", "proc-macro", "span-locations"))' -C metadata=bf4d2e20b05beaab -C extra-filename=-5ee651648616c71f --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/proc-macro2-5ee651648616c71f -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling autocfg v1.5.0 Running `/usr/local/bin/rustc --crate-name autocfg --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/autocfg-1.5.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=81d233dea508bc3f -C extra-filename=-d7c8891ff079787e --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/proc-macro2-5ee651648616c71f/build-script-build` Compiling quote v1.0.41 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/quote-1.0.41/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "proc-macro"))' -C metadata=b1a2a1b854358731 -C extra-filename=-7df859ad4e2e6f37 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/quote-7df859ad4e2e6f37 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling unicode-ident v1.0.19 Running `/usr/local/bin/rustc --crate-name unicode_ident --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unicode-ident-1.0.19/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=15f136794530531a -C extra-filename=-b391dd0b79db612a --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling libc v0.2.177 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/libc-0.2.177/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no '--allow=clippy::used_underscore_binding' --allow=unused_qualifications '--warn=clippy::unnecessary_semicolon' '--allow=clippy::unnecessary_cast' '--allow=clippy::uninlined_format_args' '--warn=clippy::ptr_as_ptr' '--allow=clippy::non_minimal_cfg' '--allow=clippy::missing_safety_doc' '--warn=clippy::map_unwrap_or' '--warn=clippy::manual_assert' '--allow=clippy::identity_op' '--warn=clippy::explicit_iter_loop' '--allow=clippy::expl_impl_clone_on_copy' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("align", "const-extern-fn", "default", "extra_traits", "rustc-dep-of-std", "rustc-std-workspace-core", "std", "use_std"))' -C metadata=3f615c5b5c26b830 -C extra-filename=-43c9d14b8863ef24 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/libc-43c9d14b8863ef24 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/libc-43c9d14b8863ef24/build-script-build` Running `/usr/local/bin/rustc --crate-name proc_macro2 --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/proc-macro2-1.0.101/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "nightly", "proc-macro", "span-locations"))' -C metadata=0158ad1f6e2a6d9b -C extra-filename=-05cc98af43442626 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern unicode_ident=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_ident-b391dd0b79db612a.rmeta --cap-lints allow --cfg wrap_proc_macro --cfg proc_macro_span_location --cfg proc_macro_span_file --check-cfg 'cfg(fuzzing)' --check-cfg 'cfg(no_is_available)' --check-cfg 'cfg(no_literal_byte_character)' --check-cfg 'cfg(no_literal_c_string)' --check-cfg 'cfg(no_source_text)' --check-cfg 'cfg(proc_macro_span)' --check-cfg 'cfg(proc_macro_span_file)' --check-cfg 'cfg(proc_macro_span_location)' --check-cfg 'cfg(procmacro2_backtrace)' --check-cfg 'cfg(procmacro2_build_probe)' --check-cfg 'cfg(procmacro2_nightly_testing)' --check-cfg 'cfg(procmacro2_semver_exempt)' --check-cfg 'cfg(randomize_layout)' --check-cfg 'cfg(span_locations)' --check-cfg 'cfg(super_unstable)' --check-cfg 'cfg(wrap_proc_macro)'` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/quote-7df859ad4e2e6f37/build-script-build` Running `/usr/local/bin/rustc --crate-name quote --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/quote-1.0.41/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "proc-macro"))' -C metadata=1201275b8f4a54fc -C extra-filename=-bde82d7a305916dc --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-05cc98af43442626.rmeta --cap-lints allow --check-cfg 'cfg(no_diagnostic_namespace)'` Running `/usr/local/bin/rustc --crate-name libc --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/libc-0.2.177/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 '--allow=clippy::used_underscore_binding' --allow=unused_qualifications '--warn=clippy::unnecessary_semicolon' '--allow=clippy::unnecessary_cast' '--allow=clippy::uninlined_format_args' '--warn=clippy::ptr_as_ptr' '--allow=clippy::non_minimal_cfg' '--allow=clippy::missing_safety_doc' '--warn=clippy::map_unwrap_or' '--warn=clippy::manual_assert' '--allow=clippy::identity_op' '--warn=clippy::explicit_iter_loop' '--allow=clippy::expl_impl_clone_on_copy' --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("align", "const-extern-fn", "default", "extra_traits", "rustc-dep-of-std", "rustc-std-workspace-core", "std", "use_std"))' -C metadata=9938652b6323f76d -C extra-filename=-9f6dc04b052fc17d --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg freebsd12 --check-cfg 'cfg(emscripten_old_stat_abi)' --check-cfg 'cfg(espidf_time32)' --check-cfg 'cfg(freebsd10)' --check-cfg 'cfg(freebsd11)' --check-cfg 'cfg(freebsd12)' --check-cfg 'cfg(freebsd13)' --check-cfg 'cfg(freebsd14)' --check-cfg 'cfg(freebsd15)' --check-cfg 'cfg(gnu_file_offset_bits64)' --check-cfg 'cfg(gnu_time_bits64)' --check-cfg 'cfg(libc_deny_warnings)' --check-cfg 'cfg(libc_thread_local)' --check-cfg 'cfg(linux_time_bits64)' --check-cfg 'cfg(musl_v1_2_3)' --check-cfg 'cfg(target_os,values("switch","aix","ohos","hurd","rtems","visionos","nuttx","cygwin"))' --check-cfg 'cfg(target_env,values("illumos","wasi","aix","ohos","nto71_iosock","nto80"))' --check-cfg 'cfg(target_arch,values("loongarch64","mips32r6","mips64r6","csky"))'` Compiling pyo3-ffi v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-ffi-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "generate-import-lib"))' -C metadata=de394c14ad93ea00 -C extra-filename=-7381fd591d0d4ee2 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-ffi-7381fd591d0d4ee2 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-90c27465f53dfea3.rlib --cap-lints allow` Compiling pyo3-macros-backend v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-macros-backend-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("experimental-async", "experimental-inspect"))' -C metadata=d2aca947e33789f7 -C extra-filename=-030ef938eda85600 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-macros-backend-030ef938eda85600 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-90c27465f53dfea3.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-macros-backend-030ef938eda85600/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-ffi-7381fd591d0d4ee2/build-script-build` Compiling syn v2.0.106 Running `/usr/local/bin/rustc --crate-name syn --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/syn-2.0.106/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="clone-impls"' --cfg 'feature="default"' --cfg 'feature="derive"' --cfg 'feature="extra-traits"' --cfg 'feature="full"' --cfg 'feature="parsing"' --cfg 'feature="printing"' --cfg 'feature="proc-macro"' --cfg 'feature="visit-mut"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("clone-impls", "default", "derive", "extra-traits", "fold", "full", "parsing", "printing", "proc-macro", "test", "visit", "visit-mut"))' -C metadata=4596313d463854b3 -C extra-filename=-f33cb756fdcb7199 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-05cc98af43442626.rmeta --extern quote=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libquote-bde82d7a305916dc.rmeta --extern unicode_ident=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_ident-b391dd0b79db612a.rmeta --cap-lints allow` Compiling memoffset v0.9.1 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/memoffset-0.9.1/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "unstable_const", "unstable_offset_of"))' -C metadata=0a072752fbc3c61b -C extra-filename=-615ffec7ea8b4a83 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/memoffset-615ffec7ea8b4a83 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern autocfg=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libautocfg-d7c8891ff079787e.rlib --cap-lints allow` Compiling zerocopy v0.8.27 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/zerocopy-0.8.27/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="simd"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("__internal_use_only_features_that_work_on_stable", "alloc", "derive", "float-nightly", "simd", "simd-nightly", "std", "zerocopy-derive"))' -C metadata=6ac46e5c87834015 -C extra-filename=-8195e536fa73898e --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/zerocopy-8195e536fa73898e -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling getrandom v0.3.3 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/getrandom-0.3.3/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=unexpected_cfgs --check-cfg 'cfg(getrandom_backend, values("custom", "efi_rng", "rdrand", "rndr", "linux_getrandom", "linux_raw", "wasm_js"))' --check-cfg 'cfg(getrandom_msan)' --check-cfg 'cfg(getrandom_windows_legacy)' --check-cfg 'cfg(getrandom_test_linux_fallback)' --check-cfg 'cfg(getrandom_test_linux_without_fallback)' --check-cfg 'cfg(getrandom_test_netbsd_fallback)' --check-cfg 'cfg(target_os, values("cygwin"))' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("rustc-dep-of-std", "std", "wasm_js"))' -C metadata=0ca4d93bcb09e039 -C extra-filename=-3133a545058fa7c9 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/getrandom-3133a545058fa7c9 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling version_check v0.9.5 Running `/usr/local/bin/rustc --crate-name version_check --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/version_check-0.9.5/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=f76bd91d56745d95 -C extra-filename=-5d52d6e47e2e28f9 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling heck v0.5.0 Running `/usr/local/bin/rustc --crate-name heck --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/heck-0.5.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=16ffb58de3cc8516 -C extra-filename=-743e215a95dff1d6 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_macros_backend --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-macros-backend-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("experimental-async", "experimental-inspect"))' -C metadata=ed221bb284ab7bc7 -C extra-filename=-56bce6c76a522c3e --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern heck=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libheck-743e215a95dff1d6.rmeta --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-05cc98af43442626.rmeta --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-90c27465f53dfea3.rmeta --extern quote=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libquote-bde82d7a305916dc.rmeta --extern syn=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libsyn-f33cb756fdcb7199.rmeta --cap-lints allow --cfg c_str_lit --cfg diagnostic_namespace --cfg io_error_more --cfg mut_ref_in_const_fn --cfg fn_ptr_eq --cfg from_bytes_with_nul_error --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(Py_GIL_DISABLED)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)' --check-cfg 'cfg(Py_3_14)' --check-cfg 'cfg(Py_3_15)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(io_error_more)' --check-cfg 'cfg(mut_ref_in_const_fn)' --check-cfg 'cfg(fn_ptr_eq)' --check-cfg 'cfg(from_bytes_with_nul_error)'` Compiling ahash v0.8.12 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/ahash-0.8.12/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="getrandom"' --cfg 'feature="runtime-rng"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("atomic-polyfill", "compile-time-rng", "const-random", "default", "getrandom", "nightly-arm-aes", "no-rng", "runtime-rng", "serde", "std"))' -C metadata=74afe74ac2747821 -C extra-filename=-349f4b2e96a1da75 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/ahash-349f4b2e96a1da75 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern version_check=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libversion_check-5d52d6e47e2e28f9.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/getrandom-3133a545058fa7c9/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/zerocopy-8195e536fa73898e/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/memoffset-615ffec7ea8b4a83/build-script-build` Compiling num-traits v0.2.19 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/num-traits-0.2.19/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "i128", "libm", "std"))' -C metadata=91db820f1d8032db -C extra-filename=-5d5ee27d135863cb --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/num-traits-5d5ee27d135863cb -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern autocfg=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libautocfg-d7c8891ff079787e.rlib --cap-lints allow` Compiling pyo3 v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --cfg 'feature="indoc"' --cfg 'feature="macros"' --cfg 'feature="pyo3-macros"' --cfg 'feature="unindent"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "anyhow", "arc_lock", "auto-initialize", "bigdecimal", "bytes", "chrono", "chrono-local", "chrono-tz", "default", "either", "experimental-async", "experimental-inspect", "extension-module", "eyre", "full", "generate-import-lib", "hashbrown", "indexmap", "indoc", "inventory", "jiff-02", "lock_api", "macros", "multiple-pymethods", "nightly", "num-bigint", "num-complex", "num-rational", "ordered-float", "parking_lot", "py-clone", "pyo3-macros", "rust_decimal", "serde", "smallvec", "time", "unindent", "uuid"))' -C metadata=62b215b04f0bccb6 -C extra-filename=-d770fdfbe93871ed --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-d770fdfbe93871ed -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-90c27465f53dfea3.rlib --cap-lints allow` Compiling cfg-if v1.0.3 Running `/usr/local/bin/rustc --crate-name cfg_if --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/cfg-if-1.0.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("core", "rustc-dep-of-std"))' -C metadata=3a6db28479c600ce -C extra-filename=-87a2b7d6a1738318 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling tinyvec_macros v0.1.1 Running `/usr/local/bin/rustc --crate-name tinyvec_macros --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/tinyvec_macros-0.1.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=f0da1b30f51cbdba -C extra-filename=-d4937799ff434706 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling once_cell v1.21.3 Running `/usr/local/bin/rustc --crate-name once_cell --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/once_cell-1.21.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="race"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("alloc", "atomic-polyfill", "critical-section", "default", "parking_lot", "portable-atomic", "race", "std", "unstable"))' -C metadata=8b903445b8ebf3c9 -C extra-filename=-0f0590d86869044d --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling tinyvec v1.10.0 Running `/usr/local/bin/rustc --crate-name tinyvec --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/tinyvec-1.10.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="tinyvec_macros"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("alloc", "arbitrary", "borsh", "debugger_visualizer", "default", "experimental_write_impl", "generic-array", "grab_spare_slice", "latest_stable_rust", "nightly_slice_partition_dedup", "real_blackbox", "rustc_1_40", "rustc_1_55", "rustc_1_57", "rustc_1_61", "serde", "std", "tinyvec_macros"))' -C metadata=e64dd1c1cf593d95 -C extra-filename=-84402c6ff92bb86e --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern tinyvec_macros=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtinyvec_macros-d4937799ff434706.rmeta --cap-lints allow` Running `/usr/local/bin/rustc --crate-name getrandom --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/getrandom-0.3.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=unexpected_cfgs --check-cfg 'cfg(getrandom_backend, values("custom", "efi_rng", "rdrand", "rndr", "linux_getrandom", "linux_raw", "wasm_js"))' --check-cfg 'cfg(getrandom_msan)' --check-cfg 'cfg(getrandom_windows_legacy)' --check-cfg 'cfg(getrandom_test_linux_fallback)' --check-cfg 'cfg(getrandom_test_linux_without_fallback)' --check-cfg 'cfg(getrandom_test_netbsd_fallback)' --check-cfg 'cfg(target_os, values("cygwin"))' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("rustc-dep-of-std", "std", "wasm_js"))' -C metadata=32473756ad280468 -C extra-filename=-e1e52e01ba03f9d6 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libcfg_if-87a2b7d6a1738318.rmeta --extern libc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/liblibc-9f6dc04b052fc17d.rmeta --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-d770fdfbe93871ed/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/num-traits-5d5ee27d135863cb/build-script-build` Running `/usr/local/bin/rustc --crate-name memoffset --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/memoffset-0.9.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "unstable_const", "unstable_offset_of"))' -C metadata=ad1e2b960214c8ba -C extra-filename=-0d723c9299a269be --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg tuple_ty --cfg allow_clippy --cfg maybe_uninit --cfg doctests --cfg raw_ref_macros --cfg stable_const --cfg stable_offset_of` Running `/usr/local/bin/rustc --crate-name zerocopy --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/zerocopy-0.8.27/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="simd"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("__internal_use_only_features_that_work_on_stable", "alloc", "derive", "float-nightly", "simd", "simd-nightly", "std", "zerocopy-derive"))' -C metadata=ad1e2f0d6a2302d8 -C extra-filename=-22e10ba04f4b3bad --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg zerocopy_core_error_1_81_0 --cfg zerocopy_diagnostic_on_unimplemented_1_78_0 --cfg zerocopy_generic_bounds_in_const_fn_1_61_0 --cfg zerocopy_target_has_atomics_1_60_0 --cfg zerocopy_aarch64_simd_1_59_0 --cfg zerocopy_panic_in_const_and_vec_try_reserve_1_57_0 --check-cfg 'cfg(zerocopy_core_error_1_81_0)' --check-cfg 'cfg(rust, values("1.81.0"))' --check-cfg 'cfg(zerocopy_diagnostic_on_unimplemented_1_78_0)' --check-cfg 'cfg(rust, values("1.78.0"))' --check-cfg 'cfg(zerocopy_generic_bounds_in_const_fn_1_61_0)' --check-cfg 'cfg(rust, values("1.61.0"))' --check-cfg 'cfg(zerocopy_target_has_atomics_1_60_0)' --check-cfg 'cfg(rust, values("1.60.0"))' --check-cfg 'cfg(zerocopy_aarch64_simd_1_59_0)' --check-cfg 'cfg(rust, values("1.59.0"))' --check-cfg 'cfg(zerocopy_panic_in_const_and_vec_try_reserve_1_57_0)' --check-cfg 'cfg(rust, values("1.57.0"))' --check-cfg 'cfg(doc_cfg)' --check-cfg 'cfg(kani)' --check-cfg 'cfg(__ZEROCOPY_INTERNAL_USE_ONLY_NIGHTLY_FEATURES_IN_TESTS)' --check-cfg 'cfg(coverage_nightly)'` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/ahash-349f4b2e96a1da75/build-script-build` Compiling pyo3-macros v0.26.0 Running `/usr/local/bin/rustc --crate-name pyo3_macros --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-macros-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type proc-macro --emit=dep-info,link -C prefer-dynamic -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("experimental-async", "experimental-inspect", "multiple-pymethods"))' -C metadata=d672da36a5c37e55 -C extra-filename=-21389298aedf7d87 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-05cc98af43442626.rlib --extern pyo3_macros_backend=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_macros_backend-56bce6c76a522c3e.rlib --extern quote=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libquote-bde82d7a305916dc.rlib --extern syn=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libsyn-f33cb756fdcb7199.rlib --extern proc_macro --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_ffi --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-ffi-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "generate-import-lib"))' -C metadata=be6359aa2faa5e51 -C extra-filename=-0d5f1368904ca767 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern libc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/liblibc-9f6dc04b052fc17d.rmeta --cap-lints allow --cfg Py_3_7 --cfg Py_3_8 --cfg Py_3_9 --cfg Py_3_10 --cfg Py_3_11 --cfg Py_3_12 --cfg Py_3_13 --cfg c_str_lit --cfg diagnostic_namespace --cfg io_error_more --cfg mut_ref_in_const_fn --cfg fn_ptr_eq --cfg from_bytes_with_nul_error --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(Py_GIL_DISABLED)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)' --check-cfg 'cfg(Py_3_14)' --check-cfg 'cfg(Py_3_15)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(io_error_more)' --check-cfg 'cfg(mut_ref_in_const_fn)' --check-cfg 'cfg(fn_ptr_eq)' --check-cfg 'cfg(from_bytes_with_nul_error)'` Compiling unindent v0.2.4 Running `/usr/local/bin/rustc --crate-name unindent --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unindent-0.2.4/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=a255bbe1a7f3433b -C extra-filename=-68af436ea14627f8 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling indoc v2.0.6 Running `/usr/local/bin/rustc --crate-name indoc --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/indoc-2.0.6/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type proc-macro --emit=dep-info,link -C prefer-dynamic -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=a7115dc4052cc975 -C extra-filename=-ff062d24e609b1fc --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3 --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --cfg 'feature="indoc"' --cfg 'feature="macros"' --cfg 'feature="pyo3-macros"' --cfg 'feature="unindent"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "anyhow", "arc_lock", "auto-initialize", "bigdecimal", "bytes", "chrono", "chrono-local", "chrono-tz", "default", "either", "experimental-async", "experimental-inspect", "extension-module", "eyre", "full", "generate-import-lib", "hashbrown", "indexmap", "indoc", "inventory", "jiff-02", "lock_api", "macros", "multiple-pymethods", "nightly", "num-bigint", "num-complex", "num-rational", "ordered-float", "parking_lot", "py-clone", "pyo3-macros", "rust_decimal", "serde", "smallvec", "time", "unindent", "uuid"))' -C metadata=6fc45eef9cc13035 -C extra-filename=-9fd15e59d259f5a2 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern indoc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libindoc-ff062d24e609b1fc.so --extern libc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/liblibc-9f6dc04b052fc17d.rmeta --extern memoffset=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libmemoffset-0d723c9299a269be.rmeta --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libonce_cell-0f0590d86869044d.rmeta --extern pyo3_ffi=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_ffi-0d5f1368904ca767.rmeta --extern pyo3_macros=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_macros-21389298aedf7d87.so --extern unindent=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunindent-68af436ea14627f8.rmeta --cap-lints allow --cfg Py_3_7 --cfg Py_3_8 --cfg Py_3_9 --cfg Py_3_10 --cfg Py_3_11 --cfg Py_3_12 --cfg Py_3_13 --cfg c_str_lit --cfg diagnostic_namespace --cfg io_error_more --cfg mut_ref_in_const_fn --cfg fn_ptr_eq --cfg from_bytes_with_nul_error --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(Py_GIL_DISABLED)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)' --check-cfg 'cfg(Py_3_14)' --check-cfg 'cfg(Py_3_15)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(io_error_more)' --check-cfg 'cfg(mut_ref_in_const_fn)' --check-cfg 'cfg(fn_ptr_eq)' --check-cfg 'cfg(from_bytes_with_nul_error)'` Running `/usr/local/bin/rustc --crate-name ahash --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/ahash-0.8.12/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="getrandom"' --cfg 'feature="runtime-rng"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("atomic-polyfill", "compile-time-rng", "const-random", "default", "getrandom", "nightly-arm-aes", "no-rng", "runtime-rng", "serde", "std"))' -C metadata=ebcf25c03c5805e0 -C extra-filename=-6045ec86a8e552e4 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libcfg_if-87a2b7d6a1738318.rmeta --extern getrandom=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libgetrandom-e1e52e01ba03f9d6.rmeta --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libonce_cell-0f0590d86869044d.rmeta --extern zerocopy=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libzerocopy-22e10ba04f4b3bad.rmeta --cap-lints allow --cfg folded_multiply --check-cfg 'cfg(specialize)' --check-cfg 'cfg(folded_multiply)'` Running `/usr/local/bin/rustc --crate-name num_traits --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/num-traits-0.2.19/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "i128", "libm", "std"))' -C metadata=209fdae01939eb1c -C extra-filename=-bb949e84c017ac7c --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg has_total_cmp --check-cfg 'cfg(has_total_cmp)'` Compiling unicode-normalization v0.1.24 Running `/usr/local/bin/rustc --crate-name unicode_normalization --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unicode-normalization-0.1.24/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "std"))' -C metadata=7d6a7e7ff2351229 -C extra-filename=-30f00d56d4050eff --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern tinyvec=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtinyvec-84402c6ff92bb86e.rmeta --cap-lints allow` Compiling unicode-segmentation v1.12.0 Running `/usr/local/bin/rustc --crate-name unicode_segmentation --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unicode-segmentation-1.12.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("no_std"))' -C metadata=fe0525a3c5b212b6 -C extra-filename=-9f0b85292acd7fb3 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling smallvec v1.15.1 Running `/usr/local/bin/rustc --crate-name smallvec --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/smallvec-1.15.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("arbitrary", "bincode", "const_generics", "const_new", "debugger_visualizer", "drain_filter", "drain_keep_rest", "impl_bincode", "malloc_size_of", "may_dangle", "serde", "specialization", "union", "unty", "write"))' -C metadata=c9701273704af6a0 -C extra-filename=-befe049df23781cc --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling jellyfish v1.2.1 (/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1) Running `/usr/local/bin/rustc --crate-name jellyfish --edition=2021 src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type cdylib --emit=dep-info,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="python"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("python"))' -C metadata=7107ce74b1eac685 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern ahash=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libahash-6045ec86a8e552e4.rlib --extern num_traits=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libnum_traits-bb949e84c017ac7c.rlib --extern pyo3=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3-9fd15e59d259f5a2.rlib --extern smallvec=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libsmallvec-befe049df23781cc.rlib --extern unicode_normalization=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_normalization-30f00d56d4050eff.rlib --extern unicode_segmentation=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_segmentation-9f0b85292acd7fb3.rlib` Finished `release` profile [optimized] target(s) in 1m 44s 📦 Built wheel for CPython 3.13 to /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/wheels/jellyfish-1.2.1-cp313-cp313-openbsd_7_8_amd64.whl >>> Running fake in textproc/py-jellyfish at 1767863781.44 ===> textproc/py-jellyfish ===> Faking installation for py3-jellyfish-1.2.1 >>> Running package in textproc/py-jellyfish at 1767863782.18 ===> textproc/py-jellyfish `/exopi-obj/pobj/py-jellyfish-1.2.1/fake-amd64/.fake_done' is up to date. ===> Building package for py3-jellyfish-1.2.1 Create /exopi-cvs/ports/packages/amd64/all/py3-jellyfish-1.2.1.tgz Creating package py3-jellyfish-1.2.1 reading plist| checking dependencies| checking dependencies|lang/python/3,-main checksumming| checksumming| | 0% checksumming|** | 3% checksumming|**** | 7% checksumming|****** | 10% checksumming|******** | 14% checksumming|*********** | 17% checksumming|************* | 21% checksumming|*************** | 24% checksumming|***************** | 28% checksumming|******************* | 31% checksumming|********************* | 34% checksumming|*********************** | 38% checksumming|************************* | 41% checksumming|*************************** | 45% checksumming|***************************** | 48% checksumming|******************************** | 52% checksumming|********************************** | 55% checksumming|************************************ | 59% checksumming|************************************** | 62% checksumming|**************************************** | 66% checksumming|****************************************** | 69% checksumming|******************************************** | 72% checksumming|********************************************** | 76% checksumming|************************************************ | 79% checksumming|************************************************** | 83% checksumming|***************************************************** | 86% checksumming|******************************************************* | 90% checksumming|********************************************************* | 93% checksumming|*********************************************************** | 97% checksumming|*************************************************************|100% archiving| archiving| | 0% archiving|* | 2% archiving|** | 3% archiving|** | 4% archiving|*************************************************************** | 98% archiving|*************************************************************** | 99% archiving|****************************************************************|100% Link to /exopi-cvs/ports/packages/amd64/ftp/py3-jellyfish-1.2.1.tgz >>> Running clean in textproc/py-jellyfish at 1767863785.07 ===> textproc/py-jellyfish ===> Cleaning for py3-jellyfish-1.2.1 >>> Ended at 1767863785.55 max_stuck=11.57/depends=4.60/show-prepare-results=1.48/patch=5.72/configure=0.57/build=105.85/fake=0.74/package=2.90/clean=0.51