>>> Building on exopi-6 under textproc/py-jellyfish BDEPENDS = [devel/py-build;devel/cargo-generate-vendor;devel/py-installer;lang/python/3;devel/maturin;lang/rust] DIST = [devel/py-dulwich:cargo/indoc-2.0.6.tar.gz;textproc/py-jellyfish:cargo/python3-dll-a-0.2.14.tar.gz;x11/gnome/librsvg:cargo/tinyvec_macros-0.1.1.tar.gz;x11/gnome/librsvg:cargo/once_cell-1.21.3.tar.gz;textproc/py-jellyfish:jellyfish-1.2.1.tar.gz;x11/gnome/librsvg:cargo/shlex-1.3.0.tar.gz;audio/ncspot:cargo/unicode-segmentation-1.12.0.tar.gz;x11/gnome/librsvg:cargo/serde-1.0.228.tar.gz;x11/gnome/librsvg:cargo/num-traits-0.2.19.tar.gz;devel/cargo-c:cargo/memoffset-0.9.1.tar.gz;x11/gnome/librsvg:cargo/wit-bindgen-0.46.0.tar.gz;x11/gnome/librsvg:cargo/serde_derive-1.0.228.tar.gz;x11/gnome/librsvg:cargo/target-lexicon-0.13.3.tar.gz;x11/gnome/librsvg:cargo/itoa-1.0.15.tar.gz;x11/gnome/librsvg:cargo/zerocopy-0.8.27.tar.gz;x11/gnome/librsvg:cargo/zerocopy-derive-0.8.27.tar.gz;x11/gnome/librsvg:cargo/find-msvc-tools-0.1.4.tar.gz;devel/py-libcst:cargo/pyo3-macros-0.26.0.tar.gz;x11/gnome/librsvg:cargo/quote-1.0.41.tar.gz;x11/gnome/librsvg:cargo/serde_core-1.0.228.tar.gz;devel/py-libcst:cargo/pyo3-0.26.0.tar.gz;x11/gnome/librsvg:cargo/ahash-0.8.12.tar.gz;mail/stalwart:cargo/cc-1.2.41.tar.gz;net/routinator:cargo/unicode-ident-1.0.19.tar.gz;devel/py-libcst:cargo/pyo3-macros-backend-0.26.0.tar.gz;devel/py-dulwich:cargo/unindent-0.2.4.tar.gz;devel/difftastic:cargo/proc-macro2-1.0.101.tar.gz;devel/cbindgen:cargo/getrandom-0.3.3.tar.gz;devel/ruff:cargo/cfg-if-1.0.3.tar.gz;x11/gnome/librsvg:cargo/smallvec-1.15.1.tar.gz;x11/gnome/librsvg:cargo/version_check-0.9.5.tar.gz;devel/py-libcst:cargo/pyo3-build-config-0.26.0.tar.gz;devel/ruff:cargo/csv-core-0.1.12.tar.gz;x11/gnome/librsvg:cargo/tinyvec-1.10.0.tar.gz;devel/py-libcst:cargo/pyo3-ffi-0.26.0.tar.gz;devel/cargo-audit:cargo/unicode-normalization-0.1.24.tar.gz;x11/gnome/librsvg:cargo/r-efi-5.3.0.tar.gz;x11/gnome/librsvg:cargo/heck-0.5.0.tar.gz;x11/gnome/librsvg:cargo/wasip2-1.0.1+wasi-0.2.4.tar.gz;x11/gnome/librsvg:cargo/ryu-1.0.20.tar.gz;x11/gnome/librsvg:cargo/autocfg-1.5.0.tar.gz;devel/uv:cargo/csv-1.3.1.tar.gz;x11/gnome/librsvg:cargo/memchr-2.7.6.tar.gz;devel/difftastic:cargo/syn-2.0.106.tar.gz;devel/sccache:cargo/wasi-0.14.7+wasi-0.2.4.tar.gz;x11/gnome/librsvg:cargo/libc-0.2.177.tar.gz;x11/gnome/librsvg:cargo/portable-atomic-1.11.1.tar.gz] FULLPKGNAME = py3-jellyfish-1.2.1 RDEPENDS = [lang/python/3] (Junk lock obtained for exopi-6 at 1764801167.18) >>> Running depends in textproc/py-jellyfish at 1764801167.25 last junk was in x11/xfce4/mousepad /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 was: /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 python-3.13.9 rust-1.91.1 /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 >>> Running show-prepare-results in textproc/py-jellyfish at 1764801170.82 ===> textproc/py-jellyfish ===> Building from scratch py3-jellyfish-1.2.1 ===> py3-jellyfish-1.2.1 depends on: python->=3.13,<3.14 -> python-3.13.9 ===> py3-jellyfish-1.2.1 depends on: py3-build-* -> py3-build-1.3.0 ===> py3-jellyfish-1.2.1 depends on: py3-installer-* -> py3-installer-0.7.0p2 ===> py3-jellyfish-1.2.1 depends on: maturin-* -> maturin-1.9.6 ===> py3-jellyfish-1.2.1 depends on: cargo-generate-vendor-* -> cargo-generate-vendor-1.0p1 ===> py3-jellyfish-1.2.1 depends on: rust-* -> rust-1.91.1 ===> Verifying specs: c pthread c++abi ===> found c.102.2 pthread.28.1 c++abi.9.0 cargo-generate-vendor-1.0p1 maturin-1.9.6 py3-build-1.3.0 py3-installer-0.7.0p2 python-3.13.9 rust-1.91.1 Don't run junk because nojunk in x11/qt6/qtconnectivity (Junk lock released for exopi-6 at 1764801172.74) distfiles size=5896450 >>> Running patch in textproc/py-jellyfish at 1764801172.78 ===> textproc/py-jellyfish ===> Checking files for py3-jellyfish-1.2.1 `/exopi-cvs/ports/distfiles/jellyfish-1.2.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/ahash-0.8.12.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/autocfg-1.5.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/cc-1.2.41.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/cfg-if-1.0.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/csv-1.3.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/csv-core-0.1.12.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/find-msvc-tools-0.1.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/getrandom-0.3.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/heck-0.5.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/indoc-2.0.6.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/itoa-1.0.15.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/libc-0.2.177.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/memchr-2.7.6.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/memoffset-0.9.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/num-traits-0.2.19.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/once_cell-1.21.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/portable-atomic-1.11.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/proc-macro2-1.0.101.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-build-config-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-ffi-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-macros-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-macros-backend-0.26.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/python3-dll-a-0.2.14.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/quote-1.0.41.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/r-efi-5.3.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/ryu-1.0.20.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde-1.0.228.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde_core-1.0.228.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde_derive-1.0.228.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/shlex-1.3.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/smallvec-1.15.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/syn-2.0.106.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/target-lexicon-0.13.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/tinyvec-1.10.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/tinyvec_macros-0.1.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-ident-1.0.19.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-normalization-0.1.24.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-segmentation-1.12.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unindent-0.2.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/version_check-0.9.5.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wasi-0.14.7+wasi-0.2.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wasip2-1.0.1+wasi-0.2.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wit-bindgen-0.46.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/zerocopy-0.8.27.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/zerocopy-derive-0.8.27.tar.gz' is up to date. >> (SHA256) all files: OK ===> Extracting for py3-jellyfish-1.2.1 [modcargo] moving crates to /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates ===> Patching for py3-jellyfish-1.2.1 ===> Applying OpenBSD patch patch-pyproject_toml Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: pyproject.toml |--- pyproject.toml.orig |+++ pyproject.toml -------------------------- Patching file pyproject.toml using Plan A... Hunk #1 succeeded at 4. done ===> Compiler link: clang -> /usr/bin/clang ===> Compiler link: clang++ -> /usr/bin/clang++ ===> Compiler link: cc -> /usr/bin/cc ===> Compiler link: c++ -> /usr/bin/c++ [modcargo] Generating metadata for ahash-0.8.12 [modcargo] Generating metadata for autocfg-1.5.0 [modcargo] Generating metadata for cc-1.2.41 [modcargo] Generating metadata for cfg-if-1.0.3 [modcargo] Generating metadata for csv-1.3.1 [modcargo] Generating metadata for csv-core-0.1.12 [modcargo] Generating metadata for find-msvc-tools-0.1.4 [modcargo] Generating metadata for getrandom-0.3.3 [modcargo] Generating metadata for heck-0.5.0 [modcargo] Generating metadata for indoc-2.0.6 [modcargo] Generating metadata for itoa-1.0.15 [modcargo] Generating metadata for libc-0.2.177 [modcargo] Generating metadata for memchr-2.7.6 [modcargo] Generating metadata for memoffset-0.9.1 [modcargo] Generating metadata for num-traits-0.2.19 [modcargo] Generating metadata for once_cell-1.21.3 [modcargo] Generating metadata for portable-atomic-1.11.1 [modcargo] Generating metadata for proc-macro2-1.0.101 [modcargo] Generating metadata for pyo3-0.26.0 [modcargo] Generating metadata for pyo3-build-config-0.26.0 [modcargo] Generating metadata for pyo3-ffi-0.26.0 [modcargo] Generating metadata for pyo3-macros-0.26.0 [modcargo] Generating metadata for pyo3-macros-backend-0.26.0 [modcargo] Generating metadata for python3-dll-a-0.2.14 [modcargo] Generating metadata for quote-1.0.41 [modcargo] Generating metadata for r-efi-5.3.0 [modcargo] Generating metadata for ryu-1.0.20 [modcargo] Generating metadata for serde-1.0.228 [modcargo] Generating metadata for serde_core-1.0.228 [modcargo] Generating metadata for serde_derive-1.0.228 [modcargo] Generating metadata for shlex-1.3.0 [modcargo] Generating metadata for smallvec-1.15.1 [modcargo] Generating metadata for syn-2.0.106 [modcargo] Generating metadata for target-lexicon-0.13.3 [modcargo] Generating metadata for tinyvec-1.10.0 [modcargo] Generating metadata for tinyvec_macros-0.1.1 [modcargo] Generating metadata for unicode-ident-1.0.19 [modcargo] Generating metadata for unicode-normalization-0.1.24 [modcargo] Generating metadata for unicode-segmentation-1.12.0 [modcargo] Generating metadata for unindent-0.2.4 [modcargo] Generating metadata for version_check-0.9.5 [modcargo] Generating metadata for wasi-0.14.7+wasi-0.2.4 [modcargo] Generating metadata for wasip2-1.0.1+wasi-0.2.4 [modcargo] Generating metadata for wit-bindgen-0.46.0 [modcargo] Generating metadata for zerocopy-0.8.27 [modcargo] Generating metadata for zerocopy-derive-0.8.27 >>> Running configure in textproc/py-jellyfish at 1764801179.29 ===> textproc/py-jellyfish ===> Generating configure for py3-jellyfish-1.2.1 ===> Configuring for py3-jellyfish-1.2.1 /usr/bin/perl /exopi-cvs/ports/infrastructure/bin/pkg_subst -DMODPY_PYCACHE=__pycache__/ -DMODPY_ABI3SO=.abi3 -DMODPY_PYC_MAGIC_TAG=cpython-313. -DMODPY_BIN=/usr/local/bin/python3.13 -DMODPY_DISTV=1.2.1 -DMODPY_VERSION=3.13 -DMODPY_PY_PREFIX=py3- -DMODPY_PYOEXTENSION=opt-1.pyc -DARCH=amd64 -DBASE_PKGPATH=textproc/py-jellyfish -DFLAVOR_EXT= -DFULLPKGNAME=py3-jellyfish-1.2.1 -DHOMEPAGE=https://jamesturk.github.io/jellyfish/ -DLOCALBASE=/usr/local -DLOCALSTATEDIR=/var -DMACHINE_ARCH=amd64 -DMAINTAINER=Daniel\ Dickman\ \ -DPREFIX=/usr/local -DRCDIR=/etc/rc.d -DSYSCONFDIR=/etc -DTRUEPREFIX=/usr/local -DX11BASE=/usr/X11R6 -DPKGSTEM=py3-jellyfish -i -B /exopi-obj/pobj/py-jellyfish-1.2.1 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/pyproject.toml >>> Running build in textproc/py-jellyfish at 1764801179.88 ===> textproc/py-jellyfish ===> Building for py3-jellyfish-1.2.1 ⚠️ Warning: `project.dynamic` must not specify `version` when `project.version` is present in pyproject.toml 📦 Including license file `LICENSE` 🍹 Building a mixed python/rust project 🔗 Found pyo3 bindings 🐍 Found CPython 3.13 at /usr/local/bin/python3 📡 Using build options features from pyproject.toml warning: `panic` setting is ignored for `bench` profile Compiling target-lexicon v0.13.3 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/target-lexicon-0.13.3/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("arch_z80", "arch_zkasm", "default", "serde", "serde_support", "std"))' -C metadata=603fa42f5654260c -C extra-filename=-33c21336e461dbbc --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/target-lexicon-33c21336e461dbbc -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/target-lexicon-33c21336e461dbbc/build-script-build` Running `/usr/local/bin/rustc --crate-name target_lexicon --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/target-lexicon-0.13.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("arch_z80", "arch_zkasm", "default", "serde", "serde_support", "std"))' -C metadata=ed69e3c0d7b6b925 -C extra-filename=-ca931d944af2e4d1 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg 'feature="rust_1_40"'` Compiling python3-dll-a v0.2.14 Running `/usr/local/bin/rustc --crate-name python3_dll_a --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/python3-dll-a-0.2.14/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=528c7a73c5b0611f -C extra-filename=-ab4f19cd1197c089 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling pyo3-build-config v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-build-config-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="python3-dll-a"' --cfg 'feature="resolve-config"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "python3-dll-a", "resolve-config"))' -C metadata=70abd8ff29384d34 -C extra-filename=-b10680a41a314d53 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-build-config-b10680a41a314d53 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern python3_dll_a=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpython3_dll_a-ab4f19cd1197c089.rlib --extern target_lexicon=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtarget_lexicon-ca931d944af2e4d1.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-build-config-b10680a41a314d53/build-script-build` Running `/usr/local/bin/rustc --crate-name pyo3_build_config --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-build-config-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="python3-dll-a"' --cfg 'feature="resolve-config"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "python3-dll-a", "resolve-config"))' -C metadata=3c096f98f5bf0477 -C extra-filename=-d52311ef98c05d18 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern python3_dll_a=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpython3_dll_a-ab4f19cd1197c089.rmeta --extern target_lexicon=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtarget_lexicon-ca931d944af2e4d1.rmeta --cap-lints allow` Compiling proc-macro2 v1.0.101 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/proc-macro2-1.0.101/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "nightly", "proc-macro", "span-locations"))' -C metadata=3a85dc6f92127ea0 -C extra-filename=-35c68444e13bb5d4 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/proc-macro2-35c68444e13bb5d4 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling autocfg v1.5.0 Running `/usr/local/bin/rustc --crate-name autocfg --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/autocfg-1.5.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=65ae51037b002a6f -C extra-filename=-04a2ae701b097782 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/proc-macro2-35c68444e13bb5d4/build-script-build` Compiling libc v0.2.177 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/libc-0.2.177/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no '--allow=clippy::used_underscore_binding' --allow=unused_qualifications '--warn=clippy::unnecessary_semicolon' '--allow=clippy::unnecessary_cast' '--allow=clippy::uninlined_format_args' '--warn=clippy::ptr_as_ptr' '--allow=clippy::non_minimal_cfg' '--allow=clippy::missing_safety_doc' '--warn=clippy::map_unwrap_or' '--warn=clippy::manual_assert' '--allow=clippy::identity_op' '--warn=clippy::explicit_iter_loop' '--allow=clippy::expl_impl_clone_on_copy' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("align", "const-extern-fn", "default", "extra_traits", "rustc-dep-of-std", "rustc-std-workspace-core", "std", "use_std"))' -C metadata=7e97be94f026f84e -C extra-filename=-30232c336f73ef51 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/libc-30232c336f73ef51 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling quote v1.0.41 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/quote-1.0.41/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "proc-macro"))' -C metadata=f15738f08f41231b -C extra-filename=-7bdff39146b44499 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/quote-7bdff39146b44499 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling unicode-ident v1.0.19 Running `/usr/local/bin/rustc --crate-name unicode_ident --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unicode-ident-1.0.19/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=a4a93a1c474561ed -C extra-filename=-61bd524ed4d463f3 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/usr/local/bin/rustc --crate-name proc_macro2 --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/proc-macro2-1.0.101/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "nightly", "proc-macro", "span-locations"))' -C metadata=c7edb63821b03e88 -C extra-filename=-7cae2412ae3248b8 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern unicode_ident=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_ident-61bd524ed4d463f3.rmeta --cap-lints allow --cfg wrap_proc_macro --cfg proc_macro_span_location --cfg proc_macro_span_file --check-cfg 'cfg(fuzzing)' --check-cfg 'cfg(no_is_available)' --check-cfg 'cfg(no_literal_byte_character)' --check-cfg 'cfg(no_literal_c_string)' --check-cfg 'cfg(no_source_text)' --check-cfg 'cfg(proc_macro_span)' --check-cfg 'cfg(proc_macro_span_file)' --check-cfg 'cfg(proc_macro_span_location)' --check-cfg 'cfg(procmacro2_backtrace)' --check-cfg 'cfg(procmacro2_build_probe)' --check-cfg 'cfg(procmacro2_nightly_testing)' --check-cfg 'cfg(procmacro2_semver_exempt)' --check-cfg 'cfg(randomize_layout)' --check-cfg 'cfg(span_locations)' --check-cfg 'cfg(super_unstable)' --check-cfg 'cfg(wrap_proc_macro)'` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/quote-7bdff39146b44499/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/libc-30232c336f73ef51/build-script-build` Running `/usr/local/bin/rustc --crate-name libc --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/libc-0.2.177/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 '--allow=clippy::used_underscore_binding' --allow=unused_qualifications '--warn=clippy::unnecessary_semicolon' '--allow=clippy::unnecessary_cast' '--allow=clippy::uninlined_format_args' '--warn=clippy::ptr_as_ptr' '--allow=clippy::non_minimal_cfg' '--allow=clippy::missing_safety_doc' '--warn=clippy::map_unwrap_or' '--warn=clippy::manual_assert' '--allow=clippy::identity_op' '--warn=clippy::explicit_iter_loop' '--allow=clippy::expl_impl_clone_on_copy' --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("align", "const-extern-fn", "default", "extra_traits", "rustc-dep-of-std", "rustc-std-workspace-core", "std", "use_std"))' -C metadata=8fb4d6964de6df15 -C extra-filename=-b3fabff165e06859 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg freebsd12 --check-cfg 'cfg(emscripten_old_stat_abi)' --check-cfg 'cfg(espidf_time32)' --check-cfg 'cfg(freebsd10)' --check-cfg 'cfg(freebsd11)' --check-cfg 'cfg(freebsd12)' --check-cfg 'cfg(freebsd13)' --check-cfg 'cfg(freebsd14)' --check-cfg 'cfg(freebsd15)' --check-cfg 'cfg(gnu_file_offset_bits64)' --check-cfg 'cfg(gnu_time_bits64)' --check-cfg 'cfg(libc_deny_warnings)' --check-cfg 'cfg(libc_thread_local)' --check-cfg 'cfg(linux_time_bits64)' --check-cfg 'cfg(musl_v1_2_3)' --check-cfg 'cfg(target_os,values("switch","aix","ohos","hurd","rtems","visionos","nuttx","cygwin"))' --check-cfg 'cfg(target_env,values("illumos","wasi","aix","ohos","nto71_iosock","nto80"))' --check-cfg 'cfg(target_arch,values("loongarch64","mips32r6","mips64r6","csky"))'` Running `/usr/local/bin/rustc --crate-name quote --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/quote-1.0.41/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "proc-macro"))' -C metadata=4811d9536cd46613 -C extra-filename=-f492c84c94ba255d --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-7cae2412ae3248b8.rmeta --cap-lints allow --check-cfg 'cfg(no_diagnostic_namespace)'` Compiling pyo3-ffi v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-ffi-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "generate-import-lib"))' -C metadata=b8077865fc29d281 -C extra-filename=-bc161a6badcefe92 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-ffi-bc161a6badcefe92 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-d52311ef98c05d18.rlib --cap-lints allow` Compiling pyo3-macros-backend v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-macros-backend-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("experimental-async", "experimental-inspect"))' -C metadata=929c40ca03cd4450 -C extra-filename=-bbbccf7a1d404529 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-macros-backend-bbbccf7a1d404529 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-d52311ef98c05d18.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-macros-backend-bbbccf7a1d404529/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-ffi-bc161a6badcefe92/build-script-build` Compiling syn v2.0.106 Running `/usr/local/bin/rustc --crate-name syn --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/syn-2.0.106/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="clone-impls"' --cfg 'feature="default"' --cfg 'feature="derive"' --cfg 'feature="extra-traits"' --cfg 'feature="full"' --cfg 'feature="parsing"' --cfg 'feature="printing"' --cfg 'feature="proc-macro"' --cfg 'feature="visit-mut"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("clone-impls", "default", "derive", "extra-traits", "fold", "full", "parsing", "printing", "proc-macro", "test", "visit", "visit-mut"))' -C metadata=48544f0911781305 -C extra-filename=-8baf14b54b2cab46 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-7cae2412ae3248b8.rmeta --extern quote=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libquote-f492c84c94ba255d.rmeta --extern unicode_ident=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_ident-61bd524ed4d463f3.rmeta --cap-lints allow` Compiling memoffset v0.9.1 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/memoffset-0.9.1/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "unstable_const", "unstable_offset_of"))' -C metadata=f56803a717d254a2 -C extra-filename=-09a50f65d88b33df --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/memoffset-09a50f65d88b33df -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern autocfg=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libautocfg-04a2ae701b097782.rlib --cap-lints allow` Compiling zerocopy v0.8.27 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/zerocopy-0.8.27/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="simd"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("__internal_use_only_features_that_work_on_stable", "alloc", "derive", "float-nightly", "simd", "simd-nightly", "std", "zerocopy-derive"))' -C metadata=d8055a45fe672cf2 -C extra-filename=-58d609d753ceef62 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/zerocopy-58d609d753ceef62 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling version_check v0.9.5 Running `/usr/local/bin/rustc --crate-name version_check --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/version_check-0.9.5/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=df68a65d62105e4b -C extra-filename=-690bf3f545d5768f --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling getrandom v0.3.3 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/getrandom-0.3.3/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=unexpected_cfgs --check-cfg 'cfg(getrandom_backend, values("custom", "efi_rng", "rdrand", "rndr", "linux_getrandom", "linux_raw", "wasm_js"))' --check-cfg 'cfg(getrandom_msan)' --check-cfg 'cfg(getrandom_windows_legacy)' --check-cfg 'cfg(getrandom_test_linux_fallback)' --check-cfg 'cfg(getrandom_test_linux_without_fallback)' --check-cfg 'cfg(getrandom_test_netbsd_fallback)' --check-cfg 'cfg(target_os, values("cygwin"))' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("rustc-dep-of-std", "std", "wasm_js"))' -C metadata=f8c6d90bffe8342c -C extra-filename=-9c7bd3e50ae23d20 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/getrandom-9c7bd3e50ae23d20 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling heck v0.5.0 Running `/usr/local/bin/rustc --crate-name heck --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/heck-0.5.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=5a372d77ca0b4869 -C extra-filename=-c0b289f10f0ffe2f --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_macros_backend --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-macros-backend-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("experimental-async", "experimental-inspect"))' -C metadata=d98996c825f8128d -C extra-filename=-8182a8f254a5b20d --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern heck=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libheck-c0b289f10f0ffe2f.rmeta --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-7cae2412ae3248b8.rmeta --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-d52311ef98c05d18.rmeta --extern quote=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libquote-f492c84c94ba255d.rmeta --extern syn=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libsyn-8baf14b54b2cab46.rmeta --cap-lints allow --cfg c_str_lit --cfg diagnostic_namespace --cfg io_error_more --cfg mut_ref_in_const_fn --cfg fn_ptr_eq --cfg from_bytes_with_nul_error --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(Py_GIL_DISABLED)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)' --check-cfg 'cfg(Py_3_14)' --check-cfg 'cfg(Py_3_15)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(io_error_more)' --check-cfg 'cfg(mut_ref_in_const_fn)' --check-cfg 'cfg(fn_ptr_eq)' --check-cfg 'cfg(from_bytes_with_nul_error)'` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/getrandom-9c7bd3e50ae23d20/build-script-build` Compiling ahash v0.8.12 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/ahash-0.8.12/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="getrandom"' --cfg 'feature="runtime-rng"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("atomic-polyfill", "compile-time-rng", "const-random", "default", "getrandom", "nightly-arm-aes", "no-rng", "runtime-rng", "serde", "std"))' -C metadata=a1ae3d1258c8701c -C extra-filename=-9ebed221569d1122 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/ahash-9ebed221569d1122 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern version_check=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libversion_check-690bf3f545d5768f.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/zerocopy-58d609d753ceef62/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/memoffset-09a50f65d88b33df/build-script-build` Compiling num-traits v0.2.19 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/num-traits-0.2.19/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "i128", "libm", "std"))' -C metadata=53c75ae63ec0f7be -C extra-filename=-05115eb2705f526f --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/num-traits-05115eb2705f526f -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern autocfg=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libautocfg-04a2ae701b097782.rlib --cap-lints allow` Compiling pyo3 v0.26.0 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-0.26.0/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --cfg 'feature="indoc"' --cfg 'feature="macros"' --cfg 'feature="pyo3-macros"' --cfg 'feature="unindent"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "anyhow", "arc_lock", "auto-initialize", "bigdecimal", "bytes", "chrono", "chrono-local", "chrono-tz", "default", "either", "experimental-async", "experimental-inspect", "extension-module", "eyre", "full", "generate-import-lib", "hashbrown", "indexmap", "indoc", "inventory", "jiff-02", "lock_api", "macros", "multiple-pymethods", "nightly", "num-bigint", "num-complex", "num-rational", "ordered-float", "parking_lot", "py-clone", "pyo3-macros", "rust_decimal", "serde", "smallvec", "time", "unindent", "uuid"))' -C metadata=40974b375edc5562 -C extra-filename=-041dff36f8a7c139 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-041dff36f8a7c139 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_build_config-d52311ef98c05d18.rlib --cap-lints allow` Compiling once_cell v1.21.3 Running `/usr/local/bin/rustc --crate-name once_cell --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/once_cell-1.21.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="race"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("alloc", "atomic-polyfill", "critical-section", "default", "parking_lot", "portable-atomic", "race", "std", "unstable"))' -C metadata=f5c01f32410bb915 -C extra-filename=-fd8f6b9c85c4fd26 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling cfg-if v1.0.3 Running `/usr/local/bin/rustc --crate-name cfg_if --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/cfg-if-1.0.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("core", "rustc-dep-of-std"))' -C metadata=2f42b00a0153b2aa -C extra-filename=-f668c2b0c0973e6c --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling tinyvec_macros v0.1.1 Running `/usr/local/bin/rustc --crate-name tinyvec_macros --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/tinyvec_macros-0.1.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=329b335e257d68dc -C extra-filename=-17ea1f514e8853b4 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling tinyvec v1.10.0 Running `/usr/local/bin/rustc --crate-name tinyvec --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/tinyvec-1.10.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="tinyvec_macros"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("alloc", "arbitrary", "borsh", "debugger_visualizer", "default", "experimental_write_impl", "generic-array", "grab_spare_slice", "latest_stable_rust", "nightly_slice_partition_dedup", "real_blackbox", "rustc_1_40", "rustc_1_55", "rustc_1_57", "rustc_1_61", "serde", "std", "tinyvec_macros"))' -C metadata=476a656725ead997 -C extra-filename=-1d4a603c5b1aeebd --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern tinyvec_macros=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtinyvec_macros-17ea1f514e8853b4.rmeta --cap-lints allow` Running `/usr/local/bin/rustc --crate-name getrandom --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/getrandom-0.3.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=unexpected_cfgs --check-cfg 'cfg(getrandom_backend, values("custom", "efi_rng", "rdrand", "rndr", "linux_getrandom", "linux_raw", "wasm_js"))' --check-cfg 'cfg(getrandom_msan)' --check-cfg 'cfg(getrandom_windows_legacy)' --check-cfg 'cfg(getrandom_test_linux_fallback)' --check-cfg 'cfg(getrandom_test_linux_without_fallback)' --check-cfg 'cfg(getrandom_test_netbsd_fallback)' --check-cfg 'cfg(target_os, values("cygwin"))' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("rustc-dep-of-std", "std", "wasm_js"))' -C metadata=13573e55ae867b6e -C extra-filename=-41dc336bfc85e5d6 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libcfg_if-f668c2b0c0973e6c.rmeta --extern libc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/liblibc-b3fabff165e06859.rmeta --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/pyo3-041dff36f8a7c139/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/num-traits-05115eb2705f526f/build-script-build` Running `/usr/local/bin/rustc --crate-name memoffset --edition=2015 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/memoffset-0.9.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "unstable_const", "unstable_offset_of"))' -C metadata=ec048772082d7d8e -C extra-filename=-59f685ab1c6c602b --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg tuple_ty --cfg allow_clippy --cfg maybe_uninit --cfg doctests --cfg raw_ref_macros --cfg stable_const --cfg stable_offset_of` Running `/usr/local/bin/rustc --crate-name zerocopy --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/zerocopy-0.8.27/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="simd"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("__internal_use_only_features_that_work_on_stable", "alloc", "derive", "float-nightly", "simd", "simd-nightly", "std", "zerocopy-derive"))' -C metadata=f8cd2010420e2145 -C extra-filename=-4112acaedf0c7a51 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg zerocopy_core_error_1_81_0 --cfg zerocopy_diagnostic_on_unimplemented_1_78_0 --cfg zerocopy_generic_bounds_in_const_fn_1_61_0 --cfg zerocopy_target_has_atomics_1_60_0 --cfg zerocopy_aarch64_simd_1_59_0 --cfg zerocopy_panic_in_const_and_vec_try_reserve_1_57_0 --check-cfg 'cfg(zerocopy_core_error_1_81_0)' --check-cfg 'cfg(rust, values("1.81.0"))' --check-cfg 'cfg(zerocopy_diagnostic_on_unimplemented_1_78_0)' --check-cfg 'cfg(rust, values("1.78.0"))' --check-cfg 'cfg(zerocopy_generic_bounds_in_const_fn_1_61_0)' --check-cfg 'cfg(rust, values("1.61.0"))' --check-cfg 'cfg(zerocopy_target_has_atomics_1_60_0)' --check-cfg 'cfg(rust, values("1.60.0"))' --check-cfg 'cfg(zerocopy_aarch64_simd_1_59_0)' --check-cfg 'cfg(rust, values("1.59.0"))' --check-cfg 'cfg(zerocopy_panic_in_const_and_vec_try_reserve_1_57_0)' --check-cfg 'cfg(rust, values("1.57.0"))' --check-cfg 'cfg(doc_cfg)' --check-cfg 'cfg(kani)' --check-cfg 'cfg(__ZEROCOPY_INTERNAL_USE_ONLY_NIGHTLY_FEATURES_IN_TESTS)' --check-cfg 'cfg(coverage_nightly)'` Running `/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/build/ahash-9ebed221569d1122/build-script-build` Compiling pyo3-macros v0.26.0 Running `/usr/local/bin/rustc --crate-name pyo3_macros --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-macros-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type proc-macro --emit=dep-info,link -C prefer-dynamic -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("experimental-async", "experimental-inspect", "multiple-pymethods"))' -C metadata=586faf9c25cb8d8d -C extra-filename=-3de76f3364ba02de --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libproc_macro2-7cae2412ae3248b8.rlib --extern pyo3_macros_backend=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_macros_backend-8182a8f254a5b20d.rlib --extern quote=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libquote-f492c84c94ba255d.rlib --extern syn=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libsyn-8baf14b54b2cab46.rlib --extern proc_macro --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_ffi --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-ffi-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "generate-import-lib"))' -C metadata=0669d6b68314c640 -C extra-filename=-d7e05b501984dda9 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern libc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/liblibc-b3fabff165e06859.rmeta --cap-lints allow --cfg Py_3_7 --cfg Py_3_8 --cfg Py_3_9 --cfg Py_3_10 --cfg Py_3_11 --cfg Py_3_12 --cfg Py_3_13 --cfg c_str_lit --cfg diagnostic_namespace --cfg io_error_more --cfg mut_ref_in_const_fn --cfg fn_ptr_eq --cfg from_bytes_with_nul_error --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(Py_GIL_DISABLED)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)' --check-cfg 'cfg(Py_3_14)' --check-cfg 'cfg(Py_3_15)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(io_error_more)' --check-cfg 'cfg(mut_ref_in_const_fn)' --check-cfg 'cfg(fn_ptr_eq)' --check-cfg 'cfg(from_bytes_with_nul_error)'` Compiling unindent v0.2.4 Running `/usr/local/bin/rustc --crate-name unindent --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unindent-0.2.4/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=176b59e3b8496b3a -C extra-filename=-116eea265c3b4ee4 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling indoc v2.0.6 Running `/usr/local/bin/rustc --crate-name indoc --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/indoc-2.0.6/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type proc-macro --emit=dep-info,link -C prefer-dynamic -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values())' -C metadata=ce19fc045ddf5b89 -C extra-filename=-c2e73a3cf152e8bc --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern proc_macro --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3 --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/pyo3-0.26.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes --warn=unsafe_op_in_unsafe_fn '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="generate-import-lib"' --cfg 'feature="indoc"' --cfg 'feature="macros"' --cfg 'feature="pyo3-macros"' --cfg 'feature="unindent"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py313", "abi3-py314", "abi3-py37", "abi3-py38", "abi3-py39", "anyhow", "arc_lock", "auto-initialize", "bigdecimal", "bytes", "chrono", "chrono-local", "chrono-tz", "default", "either", "experimental-async", "experimental-inspect", "extension-module", "eyre", "full", "generate-import-lib", "hashbrown", "indexmap", "indoc", "inventory", "jiff-02", "lock_api", "macros", "multiple-pymethods", "nightly", "num-bigint", "num-complex", "num-rational", "ordered-float", "parking_lot", "py-clone", "pyo3-macros", "rust_decimal", "serde", "smallvec", "time", "unindent", "uuid"))' -C metadata=1210b071d9e7fb0a -C extra-filename=-ea301c2a7ab0cb24 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern indoc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libindoc-c2e73a3cf152e8bc.so --extern libc=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/liblibc-b3fabff165e06859.rmeta --extern memoffset=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libmemoffset-59f685ab1c6c602b.rmeta --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libonce_cell-fd8f6b9c85c4fd26.rmeta --extern pyo3_ffi=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_ffi-d7e05b501984dda9.rmeta --extern pyo3_macros=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3_macros-3de76f3364ba02de.so --extern unindent=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunindent-116eea265c3b4ee4.rmeta --cap-lints allow --cfg Py_3_7 --cfg Py_3_8 --cfg Py_3_9 --cfg Py_3_10 --cfg Py_3_11 --cfg Py_3_12 --cfg Py_3_13 --cfg c_str_lit --cfg diagnostic_namespace --cfg io_error_more --cfg mut_ref_in_const_fn --cfg fn_ptr_eq --cfg from_bytes_with_nul_error --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(Py_GIL_DISABLED)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)' --check-cfg 'cfg(Py_3_14)' --check-cfg 'cfg(Py_3_15)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(io_error_more)' --check-cfg 'cfg(mut_ref_in_const_fn)' --check-cfg 'cfg(fn_ptr_eq)' --check-cfg 'cfg(from_bytes_with_nul_error)'` Running `/usr/local/bin/rustc --crate-name ahash --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/ahash-0.8.12/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="getrandom"' --cfg 'feature="runtime-rng"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("atomic-polyfill", "compile-time-rng", "const-random", "default", "getrandom", "nightly-arm-aes", "no-rng", "runtime-rng", "serde", "std"))' -C metadata=5d43ea2d088ba949 -C extra-filename=-c5644baf8ad72a17 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libcfg_if-f668c2b0c0973e6c.rmeta --extern getrandom=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libgetrandom-41dc336bfc85e5d6.rmeta --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libonce_cell-fd8f6b9c85c4fd26.rmeta --extern zerocopy=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libzerocopy-4112acaedf0c7a51.rmeta --cap-lints allow --cfg folded_multiply --check-cfg 'cfg(specialize)' --check-cfg 'cfg(folded_multiply)'` Running `/usr/local/bin/rustc --crate-name num_traits --edition=2021 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/num-traits-0.2.19/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "i128", "libm", "std"))' -C metadata=5b5213078b86251a -C extra-filename=-98cba117cd3c70c9 --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow --cfg has_total_cmp --check-cfg 'cfg(has_total_cmp)'` Compiling unicode-normalization v0.1.24 Running `/usr/local/bin/rustc --crate-name unicode_normalization --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unicode-normalization-0.1.24/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("default", "std"))' -C metadata=63d7ad0ae215f70d -C extra-filename=-22c4c0880d2c290f --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern tinyvec=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libtinyvec-1d4a603c5b1aeebd.rmeta --cap-lints allow` Compiling unicode-segmentation v1.12.0 Running `/usr/local/bin/rustc --crate-name unicode_segmentation --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/unicode-segmentation-1.12.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("no_std"))' -C metadata=ba6686dd4debdbfc -C extra-filename=-b4841e8534a715cd --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling smallvec v1.15.1 Running `/usr/local/bin/rustc --crate-name smallvec --edition=2018 /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/modcargo-crates/smallvec-1.15.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("arbitrary", "bincode", "const_generics", "const_new", "debugger_visualizer", "drain_filter", "drain_keep_rest", "impl_bincode", "malloc_size_of", "may_dangle", "serde", "specialization", "union", "unty", "write"))' -C metadata=42f0f30a81fe6d24 -C extra-filename=-417d9e8785f5663b --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --cap-lints allow` Compiling jellyfish v1.2.1 (/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1) Running `/usr/local/bin/rustc --crate-name jellyfish --edition=2021 src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type cdylib --emit=dep-info,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="python"' --check-cfg 'cfg(docsrs,test)' --check-cfg 'cfg(feature, values("python"))' -C metadata=954a55c82cf7ab7a --out-dir /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps --extern ahash=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libahash-c5644baf8ad72a17.rlib --extern num_traits=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libnum_traits-98cba117cd3c70c9.rlib --extern pyo3=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libpyo3-ea301c2a7ab0cb24.rlib --extern smallvec=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libsmallvec-417d9e8785f5663b.rlib --extern unicode_normalization=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_normalization-22c4c0880d2c290f.rlib --extern unicode_segmentation=/exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/release/deps/libunicode_segmentation-b4841e8534a715cd.rlib` Finished `release` profile [optimized] target(s) in 1m 45s 📦 Built wheel for CPython 3.13 to /exopi-obj/pobj/py-jellyfish-1.2.1/jellyfish-1.2.1/target/wheels/jellyfish-1.2.1-cp313-cp313-openbsd_7_8_amd64.whl >>> Running fake in textproc/py-jellyfish at 1764801287.31 ===> textproc/py-jellyfish ===> Faking installation for py3-jellyfish-1.2.1 >>> Running package in textproc/py-jellyfish at 1764801288.12 ===> textproc/py-jellyfish `/exopi-obj/pobj/py-jellyfish-1.2.1/fake-amd64/.fake_done' is up to date. ===> Building package for py3-jellyfish-1.2.1 Create /exopi-cvs/ports/packages/amd64/all/py3-jellyfish-1.2.1.tgz Creating package py3-jellyfish-1.2.1 reading plist| checking dependencies| checking dependencies|lang/python/3,-main checksumming| checksumming| | 0% checksumming|** | 3% checksumming|**** | 7% checksumming|****** | 10% checksumming|******** | 14% checksumming|*********** | 17% checksumming|************* | 21% checksumming|*************** | 24% checksumming|***************** | 28% checksumming|******************* | 31% checksumming|********************* | 34% checksumming|*********************** | 38% checksumming|************************* | 41% checksumming|*************************** | 45% checksumming|***************************** | 48% checksumming|******************************** | 52% checksumming|********************************** | 55% checksumming|************************************ | 59% checksumming|************************************** | 62% checksumming|**************************************** | 66% checksumming|****************************************** | 69% checksumming|******************************************** | 72% checksumming|********************************************** | 76% checksumming|************************************************ | 79% checksumming|************************************************** | 83% checksumming|***************************************************** | 86% checksumming|******************************************************* | 90% checksumming|********************************************************* | 93% checksumming|*********************************************************** | 97% checksumming|*************************************************************|100% archiving| archiving| | 0% archiving|* | 2% archiving|** | 3% archiving|** | 4% archiving|*************************************************************** | 98% archiving|*************************************************************** | 99% archiving|****************************************************************|100% Link to /exopi-cvs/ports/packages/amd64/ftp/py3-jellyfish-1.2.1.tgz >>> Running clean in textproc/py-jellyfish at 1764801291.03 ===> textproc/py-jellyfish ===> Cleaning for py3-jellyfish-1.2.1 >>> Ended at 1764801291.59 max_stuck=11.47/depends=3.60/show-prepare-results=1.95/patch=6.49/configure=0.61/build=107.41/fake=0.84/package=2.91/clean=0.60