>>> Building on exopi-2 under textproc/py-jellyfish BDEPENDS = [devel/py-installer;devel/cargo-generate-vendor;devel/py-build;lang/python/3;devel/py-pip;lang/rust;devel/maturin] DIST = [textproc/py-jellyfish:cargo/target-lexicon-0.12.15.tar.gz;x11/gnome/librsvg:cargo/serde-1.0.204.tar.gz;x11/gnome/librsvg:cargo/quote-1.0.36.tar.gz;x11/gnome/librsvg:cargo/ahash-0.8.11.tar.gz;textproc/py-jellyfish:jellyfish-1.1.0.tar.gz;x11/gnome/librsvg:cargo/num-traits-0.2.19.tar.gz;mail/meli:cargo/csv-1.3.0.tar.gz;devel/jujutsu:cargo/indoc-2.0.5.tar.gz;x11/gnome/librsvg:cargo/getrandom-0.2.15.tar.gz;x11/gnome/librsvg:cargo/itoa-1.0.11.tar.gz;x11/gnome/librsvg:cargo/memchr-2.7.4.tar.gz;x11/gnome/librsvg:cargo/serde_derive-1.0.204.tar.gz;x11/gnome/librsvg:cargo/heck-0.5.0.tar.gz;x11/gnome/librsvg:cargo/autocfg-1.3.0.tar.gz;x11/gnome/librsvg:cargo/syn-2.0.72.tar.gz;devel/cargo-c:cargo/memoffset-0.9.1.tar.gz;x11/gnome/librsvg:cargo/tinyvec-1.8.0.tar.gz;benchmarks/hyperfine:cargo/csv-core-0.1.11.tar.gz;devel/py-rpds-py:cargo/pyo3-macros-backend-0.22.2.tar.gz;devel/py-rpds-py:cargo/pyo3-0.22.2.tar.gz;x11/gnome/librsvg:cargo/zerocopy-derive-0.7.35.tar.gz;audio/ncspot:cargo/unicode-segmentation-1.11.0.tar.gz;x11/gnome/librsvg:cargo/cfg-if-1.0.0.tar.gz;devel/py-rpds-py:cargo/pyo3-ffi-0.22.2.tar.gz;devel/py-rpds-py:cargo/pyo3-macros-0.22.2.tar.gz;x11/gnome/librsvg:cargo/unicode-ident-1.0.12.tar.gz;x11/gnome/librsvg:cargo/zerocopy-0.7.35.tar.gz;shells/nushell:cargo/portable-atomic-1.7.0.tar.gz;x11/gnome/librsvg:cargo/version_check-0.9.5.tar.gz;devel/py-dulwich:cargo/unindent-0.2.3.tar.gz;x11/gnome/librsvg:cargo/once_cell-1.19.0.tar.gz;x11/gnome/librsvg:cargo/wasi-0.11.0+wasi-snapshot-preview1.tar.gz;x11/gnome/librsvg:cargo/smallvec-1.13.2.tar.gz;x11/gnome/librsvg:cargo/libc-0.2.155.tar.gz;x11/gnome/librsvg:cargo/proc-macro2-1.0.86.tar.gz;x11/gnome/librsvg:cargo/unicode-normalization-0.1.23.tar.gz;x11/gnome/librsvg:cargo/ryu-1.0.18.tar.gz;devel/py-rpds-py:cargo/pyo3-build-config-0.22.2.tar.gz;x11/gnome/librsvg:cargo/tinyvec_macros-0.1.1.tar.gz] FULLPKGNAME = py3-jellyfish-1.1.0p1 RDEPENDS = [lang/python/3] (Junk lock obtained for exopi-2 at 1735150002.04) >>> Running depends in textproc/py-jellyfish at 1735150002.10 last junk was in sysutils/libvirt /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.7.6 py3-build-1.2.2.post1p0 py3-installer-0.7.0p1 py3-pip-24.3.1p0 rust-1.83.0p0 was: /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.7.6 py3-build-1.2.2.post1p0 py3-installer-0.7.0p1 py3-pip-24.3.1p0 python-3.12.8p0 rust-1.83.0p0 /usr/sbin/pkg_add -aI -Drepair cargo-generate-vendor-1.0p1 maturin-1.7.6 py3-build-1.2.2.post1p0 py3-installer-0.7.0p1 py3-pip-24.3.1p0 rust-1.83.0p0 >>> Running show-prepare-results in textproc/py-jellyfish at 1735150006.75 ===> textproc/py-jellyfish ===> Building from scratch py3-jellyfish-1.1.0p1 ===> py3-jellyfish-1.1.0p1 depends on: maturin-* -> maturin-1.7.6 ===> py3-jellyfish-1.1.0p1 depends on: py3-pip-* -> py3-pip-24.3.1p0 ===> py3-jellyfish-1.1.0p1 depends on: cargo-generate-vendor-* -> cargo-generate-vendor-1.0p1 ===> py3-jellyfish-1.1.0p1 depends on: python->=3.12,<3.13 -> python-3.12.8p0 ===> py3-jellyfish-1.1.0p1 depends on: py3-build-* -> py3-build-1.2.2.post1p0 ===> py3-jellyfish-1.1.0p1 depends on: py3-installer-* -> py3-installer-0.7.0p1 ===> py3-jellyfish-1.1.0p1 depends on: rust-* -> rust-1.83.0p0 ===> Verifying specs: c pthread c++abi ===> found c.100.3 pthread.27.1 c++abi.7.0 cargo-generate-vendor-1.0p1 maturin-1.7.6 py3-build-1.2.2.post1p0 py3-installer-0.7.0p1 py3-pip-24.3.1p0 python-3.12.8p0 rust-1.83.0p0 (Junk lock released for exopi-2 at 1735150008.65) distfiles size=4360188 >>> Running build in textproc/py-jellyfish at 1735150008.70 ===> textproc/py-jellyfish ===> Checking files for py3-jellyfish-1.1.0p1 `/exopi-cvs/ports/distfiles/jellyfish-1.1.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/ahash-0.8.11.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/autocfg-1.3.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/cfg-if-1.0.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/csv-1.3.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/csv-core-0.1.11.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/getrandom-0.2.15.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/heck-0.5.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/indoc-2.0.5.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/itoa-1.0.11.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/libc-0.2.155.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/memchr-2.7.4.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/memoffset-0.9.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/num-traits-0.2.19.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/once_cell-1.19.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/portable-atomic-1.7.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/proc-macro2-1.0.86.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-0.22.2.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-build-config-0.22.2.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-ffi-0.22.2.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-macros-0.22.2.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/pyo3-macros-backend-0.22.2.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/quote-1.0.36.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/ryu-1.0.18.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde-1.0.204.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/serde_derive-1.0.204.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/smallvec-1.13.2.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/syn-2.0.72.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/target-lexicon-0.12.15.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/tinyvec-1.8.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/tinyvec_macros-0.1.1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-ident-1.0.12.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-normalization-0.1.23.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unicode-segmentation-1.11.0.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/unindent-0.2.3.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/version_check-0.9.5.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/wasi-0.11.0+wasi-snapshot-preview1.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/zerocopy-0.7.35.tar.gz' is up to date. `/exopi-cvs/ports/distfiles/cargo/zerocopy-derive-0.7.35.tar.gz' is up to date. >> (SHA256) all files: OK ===> Extracting for py3-jellyfish-1.1.0p1 [modcargo] moving crates to /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates ===> Patching for py3-jellyfish-1.1.0p1 ===> Compiler link: clang -> /usr/bin/clang ===> Compiler link: clang++ -> /usr/bin/clang++ ===> Compiler link: cc -> /usr/bin/cc ===> Compiler link: c++ -> /usr/bin/c++ [modcargo] Generating metadata for ahash-0.8.11 [modcargo] Generating metadata for autocfg-1.3.0 [modcargo] Generating metadata for cfg-if-1.0.0 [modcargo] Generating metadata for csv-1.3.0 [modcargo] Generating metadata for csv-core-0.1.11 [modcargo] Generating metadata for getrandom-0.2.15 [modcargo] Generating metadata for heck-0.5.0 [modcargo] Generating metadata for indoc-2.0.5 [modcargo] Generating metadata for itoa-1.0.11 [modcargo] Generating metadata for libc-0.2.155 [modcargo] Generating metadata for memchr-2.7.4 [modcargo] Generating metadata for memoffset-0.9.1 [modcargo] Generating metadata for num-traits-0.2.19 [modcargo] Generating metadata for once_cell-1.19.0 [modcargo] Generating metadata for portable-atomic-1.7.0 [modcargo] Generating metadata for proc-macro2-1.0.86 [modcargo] Generating metadata for pyo3-0.22.2 [modcargo] Generating metadata for pyo3-build-config-0.22.2 [modcargo] Generating metadata for pyo3-ffi-0.22.2 [modcargo] Generating metadata for pyo3-macros-0.22.2 [modcargo] Generating metadata for pyo3-macros-backend-0.22.2 [modcargo] Generating metadata for quote-1.0.36 [modcargo] Generating metadata for ryu-1.0.18 [modcargo] Generating metadata for serde-1.0.204 [modcargo] Generating metadata for serde_derive-1.0.204 [modcargo] Generating metadata for smallvec-1.13.2 [modcargo] Generating metadata for syn-2.0.72 [modcargo] Generating metadata for target-lexicon-0.12.15 [modcargo] Generating metadata for tinyvec-1.8.0 [modcargo] Generating metadata for tinyvec_macros-0.1.1 [modcargo] Generating metadata for unicode-ident-1.0.12 [modcargo] Generating metadata for unicode-normalization-0.1.23 [modcargo] Generating metadata for unicode-segmentation-1.11.0 [modcargo] Generating metadata for unindent-0.2.3 [modcargo] Generating metadata for version_check-0.9.5 [modcargo] Generating metadata for wasi-0.11.0+wasi-snapshot-preview1 [modcargo] Generating metadata for zerocopy-0.7.35 [modcargo] Generating metadata for zerocopy-derive-0.7.35 ===> Generating configure for py3-jellyfish-1.1.0p1 ===> Configuring for py3-jellyfish-1.1.0p1 ===> Building for py3-jellyfish-1.1.0p1 cd /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0 && /usr/bin/env -i CC=cc PYTHONUSERBASE= PORTSDIR="/exopi-cvs/ports" LIBTOOL="/usr/bin/libtool" PATH='/exopi-obj/pobj/py-jellyfish-1.1.0/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11R6/bin' PREFIX='/usr/local' LOCALBASE='/usr/local' X11BASE='/usr/X11R6' CFLAGS='-O2 -pipe' TRUEPREFIX='/usr/local' DESTDIR='' HOME='/py-jellyfish-1.1.0_writes_to_HOME' PICFLAG="-fpic" BINGRP=bin BINOWN=root BINMODE=755 NONBINMODE=644 DIRMODE=755 INSTALL_COPY=-c INSTALL_STRIP=-s MANGRP=bin MANOWN=root MANMODE=644 BSD_INSTALL_PROGRAM="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -c -s -m 755" BSD_INSTALL_SCRIPT="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -c -m 755" BSD_INSTALL_DATA="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -c -m 644" BSD_INSTALL_MAN="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -c -m 644" BSD_INSTALL_PROGRAM_DIR="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -d -m 755" BSD_INSTALL_SCRIPT_DIR="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -d -m 755" BSD_INSTALL_DATA_DIR="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -d -m 755" BSD_INSTALL_MAN_DIR="/exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -d -m 755" CARGO_HOME=/exopi-obj/pobj/py-jellyfish-1.1.0/cargo-home CARGO_BUILD_JOBS=1 CARGO_TARGET_DIR=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target CARGO_NET_OFFLINE=true CARGO_TERM_VERBOSE=true CARGO_TERM_COLOR=never CARGO_TERM_PROGRESS_WHEN=never RUST_BACKTRACE=full RUSTC=/usr/local/bin/rustc RUSTDOC=/usr/local/bin/rustdoc RUSTFLAGS="" maturin build --manifest-path /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/Cargo.toml --release 📦 Including license file "/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/LICENSE" 🍹 Building a mixed python/rust project 🔗 Found pyo3 bindings 🐍 Found CPython 3.12 at /usr/local/bin/python3 📡 Using build options features from pyproject.toml warning: `panic` setting is ignored for `bench` profile Compiling target-lexicon v0.12.15 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/target-lexicon-0.12.15/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("arch_zkasm", "default", "serde", "serde_support", "std"))' -C metadata=da6b3bcd8a25eab7 -C extra-filename=-da6b3bcd8a25eab7 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/target-lexicon-da6b3bcd8a25eab7 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/target-lexicon-da6b3bcd8a25eab7/build-script-build` Running `/usr/local/bin/rustc --crate-name target_lexicon --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/target-lexicon-0.12.15/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("arch_zkasm", "default", "serde", "serde_support", "std"))' -C metadata=6902d4d8bd9786c2 -C extra-filename=-6902d4d8bd9786c2 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow --cfg 'feature="rust_1_40"'` Compiling pyo3-build-config v0.22.2 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-build-config-0.22.2/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="resolve-config"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "python3-dll-a", "resolve-config"))' -C metadata=48a3cb053a0a9997 -C extra-filename=-48a3cb053a0a9997 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-build-config-48a3cb053a0a9997 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern target_lexicon=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libtarget_lexicon-6902d4d8bd9786c2.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-build-config-48a3cb053a0a9997/build-script-build` Compiling once_cell v1.19.0 Running `/usr/local/bin/rustc --crate-name once_cell --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/once_cell-1.19.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="race"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("alloc", "atomic-polyfill", "critical-section", "default", "parking_lot", "portable-atomic", "race", "std", "unstable"))' -C metadata=864e0e98762da405 -C extra-filename=-864e0e98762da405 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_build_config --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-build-config-0.22.2/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="resolve-config"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "python3-dll-a", "resolve-config"))' -C metadata=c58d91ff9a587f39 -C extra-filename=-c58d91ff9a587f39 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libonce_cell-864e0e98762da405.rmeta --extern target_lexicon=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libtarget_lexicon-6902d4d8bd9786c2.rmeta --cap-lints allow` Compiling autocfg v1.3.0 Running `/usr/local/bin/rustc --crate-name autocfg --edition=2015 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/autocfg-1.3.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=80b75bb2fca5d3ed -C extra-filename=-80b75bb2fca5d3ed --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling proc-macro2 v1.0.86 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/proc-macro2-1.0.86/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "nightly", "proc-macro", "span-locations"))' -C metadata=386f29c4d654c605 -C extra-filename=-386f29c4d654c605 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/proc-macro2-386f29c4d654c605 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/proc-macro2-386f29c4d654c605/build-script-build` Compiling unicode-ident v1.0.12 Running `/usr/local/bin/rustc --crate-name unicode_ident --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/unicode-ident-1.0.12/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=00428ac874ebaf6e -C extra-filename=-00428ac874ebaf6e --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling libc v0.2.155 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2015 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/libc-0.2.155/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("align", "const-extern-fn", "default", "extra_traits", "rustc-dep-of-std", "rustc-std-workspace-core", "std", "use_std"))' -C metadata=2a7c4d40884c756d -C extra-filename=-2a7c4d40884c756d --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/libc-2a7c4d40884c756d -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/libc-2a7c4d40884c756d/build-script-build` Running `/usr/local/bin/rustc --crate-name proc_macro2 --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/proc-macro2-1.0.86/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "nightly", "proc-macro", "span-locations"))' -C metadata=02e1f762327676cf -C extra-filename=-02e1f762327676cf --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern unicode_ident=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libunicode_ident-00428ac874ebaf6e.rmeta --cap-lints allow --cfg wrap_proc_macro --check-cfg 'cfg(fuzzing)' --check-cfg 'cfg(no_is_available)' --check-cfg 'cfg(no_literal_byte_character)' --check-cfg 'cfg(no_literal_c_string)' --check-cfg 'cfg(no_source_text)' --check-cfg 'cfg(proc_macro_span)' --check-cfg 'cfg(procmacro2_backtrace)' --check-cfg 'cfg(procmacro2_nightly_testing)' --check-cfg 'cfg(procmacro2_semver_exempt)' --check-cfg 'cfg(randomize_layout)' --check-cfg 'cfg(span_locations)' --check-cfg 'cfg(super_unstable)' --check-cfg 'cfg(wrap_proc_macro)'` Compiling quote v1.0.36 Running `/usr/local/bin/rustc --crate-name quote --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/quote-1.0.36/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "proc-macro"))' -C metadata=26b4587165e1ae9a -C extra-filename=-26b4587165e1ae9a --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libproc_macro2-02e1f762327676cf.rmeta --cap-lints allow` Running `/usr/local/bin/rustc --crate-name libc --edition=2015 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/libc-0.2.155/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("align", "const-extern-fn", "default", "extra_traits", "rustc-dep-of-std", "rustc-std-workspace-core", "std", "use_std"))' -C metadata=153fde4e0cdba01d -C extra-filename=-153fde4e0cdba01d --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow --cfg freebsd11 --cfg libc_priv_mod_use --cfg libc_union --cfg libc_const_size_of --cfg libc_align --cfg libc_int128 --cfg libc_core_cvoid --cfg libc_packedN --cfg libc_cfg_target_vendor --cfg libc_non_exhaustive --cfg libc_long_array --cfg libc_ptr_addr_of --cfg libc_underscore_const_names --cfg libc_const_extern_fn --check-cfg 'cfg(emscripten_new_stat_abi)' --check-cfg 'cfg(espidf_time64)' --check-cfg 'cfg(freebsd10)' --check-cfg 'cfg(freebsd11)' --check-cfg 'cfg(freebsd12)' --check-cfg 'cfg(freebsd13)' --check-cfg 'cfg(freebsd14)' --check-cfg 'cfg(freebsd15)' --check-cfg 'cfg(libc_align)' --check-cfg 'cfg(libc_cfg_target_vendor)' --check-cfg 'cfg(libc_const_extern_fn)' --check-cfg 'cfg(libc_const_extern_fn_unstable)' --check-cfg 'cfg(libc_const_size_of)' --check-cfg 'cfg(libc_core_cvoid)' --check-cfg 'cfg(libc_deny_warnings)' --check-cfg 'cfg(libc_int128)' --check-cfg 'cfg(libc_long_array)' --check-cfg 'cfg(libc_non_exhaustive)' --check-cfg 'cfg(libc_packedN)' --check-cfg 'cfg(libc_priv_mod_use)' --check-cfg 'cfg(libc_ptr_addr_of)' --check-cfg 'cfg(libc_thread_local)' --check-cfg 'cfg(libc_underscore_const_names)' --check-cfg 'cfg(libc_union)' --check-cfg 'cfg(target_os,values("switch","aix","ohos","hurd","visionos"))' --check-cfg 'cfg(target_env,values("illumos","wasi","aix","ohos"))' --check-cfg 'cfg(target_arch,values("loongarch64","mips32r6","mips64r6","csky"))'` Compiling pyo3-ffi v0.22.2 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-ffi-0.22.2/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "generate-import-lib"))' -C metadata=9872adf399b83df4 -C extra-filename=-9872adf399b83df4 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-ffi-9872adf399b83df4 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_build_config-c58d91ff9a587f39.rlib --cap-lints allow` Compiling pyo3-macros-backend v0.22.2 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-macros-backend-0.22.2/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("experimental-async", "gil-refs"))' -C metadata=29b7da7e775ae6c7 -C extra-filename=-29b7da7e775ae6c7 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-macros-backend-29b7da7e775ae6c7 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_build_config-c58d91ff9a587f39.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-macros-backend-29b7da7e775ae6c7/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-ffi-9872adf399b83df4/build-script-build` Compiling syn v2.0.72 Running `/usr/local/bin/rustc --crate-name syn --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/syn-2.0.72/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="clone-impls"' --cfg 'feature="default"' --cfg 'feature="derive"' --cfg 'feature="extra-traits"' --cfg 'feature="full"' --cfg 'feature="parsing"' --cfg 'feature="printing"' --cfg 'feature="proc-macro"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("clone-impls", "default", "derive", "extra-traits", "fold", "full", "parsing", "printing", "proc-macro", "test", "visit", "visit-mut"))' -C metadata=448b79349dfe0c9c -C extra-filename=-448b79349dfe0c9c --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libproc_macro2-02e1f762327676cf.rmeta --extern quote=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libquote-26b4587165e1ae9a.rmeta --extern unicode_ident=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libunicode_ident-00428ac874ebaf6e.rmeta --cap-lints allow` Compiling memoffset v0.9.1 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2015 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/memoffset-0.9.1/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "unstable_const", "unstable_offset_of"))' -C metadata=f4067b0277ff7a68 -C extra-filename=-f4067b0277ff7a68 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/memoffset-f4067b0277ff7a68 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern autocfg=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libautocfg-80b75bb2fca5d3ed.rlib --cap-lints allow` Compiling version_check v0.9.5 Running `/usr/local/bin/rustc --crate-name version_check --edition=2015 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/version_check-0.9.5/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=144ba285daebe913 -C extra-filename=-144ba285daebe913 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling heck v0.5.0 Running `/usr/local/bin/rustc --crate-name heck --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/heck-0.5.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=c1ddd088a458e279 -C extra-filename=-c1ddd088a458e279 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling cfg-if v1.0.0 Running `/usr/local/bin/rustc --crate-name cfg_if --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/cfg-if-1.0.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("compiler_builtins", "core", "rustc-dep-of-std"))' -C metadata=01d6d532ac7973a0 -C extra-filename=-01d6d532ac7973a0 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_macros_backend --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-macros-backend-0.22.2/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("experimental-async", "gil-refs"))' -C metadata=9ecad87f61c2bb12 -C extra-filename=-9ecad87f61c2bb12 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern heck=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libheck-c1ddd088a458e279.rmeta --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libproc_macro2-02e1f762327676cf.rmeta --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_build_config-c58d91ff9a587f39.rmeta --extern quote=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libquote-26b4587165e1ae9a.rmeta --extern syn=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libsyn-448b79349dfe0c9c.rmeta --cap-lints allow --cfg invalid_from_utf8_lint --cfg c_str_lit --cfg diagnostic_namespace --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(invalid_from_utf8_lint)' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)'` Compiling ahash v0.8.11 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/ahash-0.8.11/./build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="getrandom"' --cfg 'feature="runtime-rng"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("atomic-polyfill", "compile-time-rng", "const-random", "default", "getrandom", "nightly-arm-aes", "no-rng", "runtime-rng", "serde", "std"))' -C metadata=2128d4bfed2971db -C extra-filename=-2128d4bfed2971db --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/ahash-2128d4bfed2971db -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern version_check=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libversion_check-144ba285daebe913.rlib --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/memoffset-f4067b0277ff7a68/build-script-build` Compiling num-traits v0.2.19 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/num-traits-0.2.19/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "i128", "libm", "std"))' -C metadata=bdd6843c4d478231 -C extra-filename=-bdd6843c4d478231 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/num-traits-bdd6843c4d478231 -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern autocfg=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libautocfg-80b75bb2fca5d3ed.rlib --cap-lints allow` Compiling pyo3 v0.22.2 Running `/usr/local/bin/rustc --crate-name build_script_build --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-0.22.2/build.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type bin --emit=dep-info,link -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="indoc"' --cfg 'feature="macros"' --cfg 'feature="pyo3-macros"' --cfg 'feature="unindent"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py37", "abi3-py38", "abi3-py39", "anyhow", "auto-initialize", "chrono", "chrono-tz", "default", "either", "experimental-async", "experimental-inspect", "extension-module", "eyre", "full", "generate-import-lib", "gil-refs", "hashbrown", "indexmap", "indoc", "inventory", "macros", "multiple-pymethods", "nightly", "num-bigint", "num-complex", "num-rational", "py-clone", "pyo3-macros", "rust_decimal", "serde", "smallvec", "unindent"))' -C metadata=1d7ce1cf81bb4e5d -C extra-filename=-1d7ce1cf81bb4e5d --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-1d7ce1cf81bb4e5d -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern pyo3_build_config=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_build_config-c58d91ff9a587f39.rlib --cap-lints allow` Compiling tinyvec_macros v0.1.1 Running `/usr/local/bin/rustc --crate-name tinyvec_macros --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/tinyvec_macros-0.1.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=e35654662c73af5d -C extra-filename=-e35654662c73af5d --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Running `/usr/local/bin/rustc --crate-name once_cell --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/once_cell-1.19.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="race"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("alloc", "atomic-polyfill", "critical-section", "default", "parking_lot", "portable-atomic", "race", "std", "unstable"))' -C metadata=dbe2f83dc2f83a2f -C extra-filename=-dbe2f83dc2f83a2f --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling tinyvec v1.8.0 Running `/usr/local/bin/rustc --crate-name tinyvec --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/tinyvec-1.8.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="alloc"' --cfg 'feature="default"' --cfg 'feature="tinyvec_macros"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("alloc", "arbitrary", "debugger_visualizer", "default", "experimental_write_impl", "grab_spare_slice", "nightly_slice_partition_dedup", "real_blackbox", "rustc_1_40", "rustc_1_55", "rustc_1_57", "rustc_1_61", "serde", "std", "tinyvec_macros"))' -C metadata=ec088da029295aaa -C extra-filename=-ec088da029295aaa --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern tinyvec_macros=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libtinyvec_macros-e35654662c73af5d.rmeta --cap-lints allow` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/pyo3-1d7ce1cf81bb4e5d/build-script-build` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/num-traits-bdd6843c4d478231/build-script-build` Running `/usr/local/bin/rustc --crate-name memoffset --edition=2015 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/memoffset-0.9.1/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "unstable_const", "unstable_offset_of"))' -C metadata=a87ff16a61aff424 -C extra-filename=-a87ff16a61aff424 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow --cfg tuple_ty --cfg allow_clippy --cfg maybe_uninit --cfg doctests --cfg raw_ref_macros --cfg stable_const --cfg stable_offset_of` Running `/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/build/ahash-2128d4bfed2971db/build-script-build` Compiling pyo3-macros v0.22.2 Running `/usr/local/bin/rustc --crate-name pyo3_macros --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-macros-0.22.2/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type proc-macro --emit=dep-info,link -C prefer-dynamic -C embed-bitcode=no --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("experimental-async", "gil-refs", "multiple-pymethods"))' -C metadata=d7e794b00617a83a -C extra-filename=-d7e794b00617a83a --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern proc_macro2=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libproc_macro2-02e1f762327676cf.rlib --extern pyo3_macros_backend=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_macros_backend-9ecad87f61c2bb12.rlib --extern quote=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libquote-26b4587165e1ae9a.rlib --extern syn=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libsyn-448b79349dfe0c9c.rlib --extern proc_macro --cap-lints allow` Compiling getrandom v0.2.15 Running `/usr/local/bin/rustc --crate-name getrandom --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/getrandom-0.2.15/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("compiler_builtins", "core", "custom", "js", "js-sys", "linux_disable_fallback", "rdrand", "rustc-dep-of-std", "std", "test-in-browser", "wasm-bindgen"))' -C metadata=5b06cae5a837adb8 -C extra-filename=-5b06cae5a837adb8 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libcfg_if-01d6d532ac7973a0.rmeta --extern libc=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/liblibc-153fde4e0cdba01d.rmeta --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3_ffi --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-ffi-0.22.2/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' --cfg 'feature="default"' --cfg 'feature="extension-module"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py37", "abi3-py38", "abi3-py39", "default", "extension-module", "generate-import-lib"))' -C metadata=963a6ea4afb91c82 -C extra-filename=-963a6ea4afb91c82 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern libc=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/liblibc-153fde4e0cdba01d.rmeta --cap-lints allow --cfg Py_3_6 --cfg Py_3_7 --cfg Py_3_8 --cfg Py_3_9 --cfg Py_3_10 --cfg Py_3_11 --cfg Py_3_12 --cfg invalid_from_utf8_lint --cfg c_str_lit --cfg diagnostic_namespace --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(invalid_from_utf8_lint)' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)'` Compiling zerocopy v0.7.35 Running `/usr/local/bin/rustc --crate-name zerocopy --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/zerocopy-0.7.35/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="simd"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("__internal_use_only_features_that_work_on_stable", "alloc", "byteorder", "default", "derive", "simd", "simd-nightly", "zerocopy-derive"))' -C metadata=b618bb6dae1a8b07 -C extra-filename=-b618bb6dae1a8b07 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling unindent v0.2.3 Running `/usr/local/bin/rustc --crate-name unindent --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/unindent-0.2.3/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=57b10a94138c80e5 -C extra-filename=-57b10a94138c80e5 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling indoc v2.0.5 Running `/usr/local/bin/rustc --crate-name indoc --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/indoc-2.0.5/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type proc-macro --emit=dep-info,link -C prefer-dynamic -C embed-bitcode=no -C debug-assertions=off --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values())' -C metadata=7cbb1d14dd3aca5f -C extra-filename=-7cbb1d14dd3aca5f --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern proc_macro --cap-lints allow` Running `/usr/local/bin/rustc --crate-name pyo3 --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/pyo3-0.22.2/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --warn=rust_2018_idioms '--warn=clippy::useless_transmute' '--warn=clippy::used_underscore_binding' --warn=unused_lifetimes '--warn=clippy::unnecessary_wraps' '--warn=clippy::todo' --warn=rust_2021_prelude_collisions '--warn=clippy::manual_ok_or' '--warn=clippy::manual_assert' '--warn=clippy::let_unit_value' --warn=invalid_doc_attributes '--warn=clippy::flat_map_option' '--warn=clippy::filter_map_next' '--warn=clippy::explicit_iter_loop' '--warn=clippy::explicit_into_iter_loop' --warn=elided_lifetimes_in_paths '--warn=clippy::dbg_macro' '--warn=clippy::checked_conversions' '--warn=rustdoc::broken_intra_doc_links' '--warn=rustdoc::bare_urls' --cfg 'feature="default"' --cfg 'feature="extension-module"' --cfg 'feature="indoc"' --cfg 'feature="macros"' --cfg 'feature="pyo3-macros"' --cfg 'feature="unindent"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("abi3", "abi3-py310", "abi3-py311", "abi3-py312", "abi3-py37", "abi3-py38", "abi3-py39", "anyhow", "auto-initialize", "chrono", "chrono-tz", "default", "either", "experimental-async", "experimental-inspect", "extension-module", "eyre", "full", "generate-import-lib", "gil-refs", "hashbrown", "indexmap", "indoc", "inventory", "macros", "multiple-pymethods", "nightly", "num-bigint", "num-complex", "num-rational", "py-clone", "pyo3-macros", "rust_decimal", "serde", "smallvec", "unindent"))' -C metadata=f08acfac24099408 -C extra-filename=-f08acfac24099408 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libcfg_if-01d6d532ac7973a0.rmeta --extern indoc=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libindoc-7cbb1d14dd3aca5f.so --extern libc=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/liblibc-153fde4e0cdba01d.rmeta --extern memoffset=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libmemoffset-a87ff16a61aff424.rmeta --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libonce_cell-dbe2f83dc2f83a2f.rmeta --extern pyo3_ffi=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_ffi-963a6ea4afb91c82.rmeta --extern pyo3_macros=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3_macros-d7e794b00617a83a.so --extern unindent=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libunindent-57b10a94138c80e5.rmeta --cap-lints allow --cfg Py_3_6 --cfg Py_3_7 --cfg Py_3_8 --cfg Py_3_9 --cfg Py_3_10 --cfg Py_3_11 --cfg Py_3_12 --cfg invalid_from_utf8_lint --cfg c_str_lit --cfg diagnostic_namespace --check-cfg 'cfg(Py_LIMITED_API)' --check-cfg 'cfg(PyPy)' --check-cfg 'cfg(GraalPy)' --check-cfg 'cfg(py_sys_config, values("Py_DEBUG", "Py_REF_DEBUG", "Py_TRACE_REFS", "COUNT_ALLOCS"))' --check-cfg 'cfg(invalid_from_utf8_lint)' --check-cfg 'cfg(pyo3_disable_reference_pool)' --check-cfg 'cfg(pyo3_leak_on_drop_without_reference_pool)' --check-cfg 'cfg(diagnostic_namespace)' --check-cfg 'cfg(c_str_lit)' --check-cfg 'cfg(Py_3_7)' --check-cfg 'cfg(Py_3_8)' --check-cfg 'cfg(Py_3_9)' --check-cfg 'cfg(Py_3_10)' --check-cfg 'cfg(Py_3_11)' --check-cfg 'cfg(Py_3_12)' --check-cfg 'cfg(Py_3_13)'` Running `/usr/local/bin/rustc --crate-name ahash --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/ahash-0.8.11/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="getrandom"' --cfg 'feature="runtime-rng"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("atomic-polyfill", "compile-time-rng", "const-random", "default", "getrandom", "nightly-arm-aes", "no-rng", "runtime-rng", "serde", "std"))' -C metadata=24f38b06bc2ad968 -C extra-filename=-24f38b06bc2ad968 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern cfg_if=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libcfg_if-01d6d532ac7973a0.rmeta --extern getrandom=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libgetrandom-5b06cae5a837adb8.rmeta --extern once_cell=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libonce_cell-dbe2f83dc2f83a2f.rmeta --extern zerocopy=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libzerocopy-b618bb6dae1a8b07.rmeta --cap-lints allow --cfg 'feature="folded_multiply"'` Running `/usr/local/bin/rustc --crate-name num_traits --edition=2021 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/num-traits-0.2.19/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "i128", "libm", "std"))' -C metadata=ad23750d1b411a70 -C extra-filename=-ad23750d1b411a70 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow --cfg has_total_cmp` Compiling unicode-normalization v0.1.23 Running `/usr/local/bin/rustc --crate-name unicode_normalization --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/unicode-normalization-0.1.23/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="default"' --cfg 'feature="std"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("default", "std"))' -C metadata=6ff0872225931cfb -C extra-filename=-6ff0872225931cfb --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern tinyvec=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libtinyvec-ec088da029295aaa.rmeta --cap-lints allow` Compiling unicode-segmentation v1.11.0 Running `/usr/local/bin/rustc --crate-name unicode_segmentation --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/unicode-segmentation-1.11.0/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("no_std"))' -C metadata=9f7d27bb1cad979e -C extra-filename=-9f7d27bb1cad979e --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling smallvec v1.13.2 Running `/usr/local/bin/rustc --crate-name smallvec --edition=2018 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/modcargo-crates/smallvec-1.13.2/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("arbitrary", "const_generics", "const_new", "debugger_visualizer", "drain_filter", "drain_keep_rest", "may_dangle", "serde", "specialization", "union", "write"))' -C metadata=8c700584553db128 -C extra-filename=-8c700584553db128 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --cap-lints allow` Compiling jellyfish v1.1.0 (/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0) Running `/usr/local/bin/rustc --crate-name jellyfish --edition=2021 src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type cdylib --emit=dep-info,link -C opt-level=2 -C embed-bitcode=no -C codegen-units=4 --cfg 'feature="python"' --check-cfg 'cfg(docsrs)' --check-cfg 'cfg(feature, values("python"))' -C metadata=82810c821fe78735 --out-dir /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps -C strip=debuginfo -L dependency=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps --extern ahash=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libahash-24f38b06bc2ad968.rlib --extern num_traits=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libnum_traits-ad23750d1b411a70.rlib --extern pyo3=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libpyo3-f08acfac24099408.rlib --extern smallvec=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libsmallvec-8c700584553db128.rlib --extern unicode_normalization=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libunicode_normalization-6ff0872225931cfb.rlib --extern unicode_segmentation=/exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/deps/libunicode_segmentation-9f7d27bb1cad979e.rlib` Finished `release` profile [optimized] target(s) in 1m 30s 📦 Built wheel for CPython 3.12 to /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/wheels/jellyfish-1.1.0-cp312-cp312-openbsd_7_6_amd64.whl >>> Running package in textproc/py-jellyfish at 1735150107.37 ===> textproc/py-jellyfish ===> Faking installation for py3-jellyfish-1.1.0p1 /exopi-obj/pobj/py-jellyfish-1.1.0/bin/install -c -s -m 755 /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/release/libjellyfish.so /exopi-obj/pobj/py-jellyfish-1.1.0/fake-amd64/usr/local/lib pip3.12 install --no-cache-dir --isolated --root=/exopi-obj/pobj/py-jellyfish-1.1.0/fake-amd64 --ignore-installed --no-deps /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/wheels/*.whl Processing /exopi-obj/pobj/py-jellyfish-1.1.0/jellyfish-1.1.0/target/wheels/jellyfish-1.1.0-cp312-cp312-openbsd_7_6_amd64.whl Installing collected packages: jellyfish Successfully installed jellyfish-1.1.0 ===> Building package for py3-jellyfish-1.1.0p1 Create /exopi-cvs/ports/packages/amd64/all/py3-jellyfish-1.1.0p1.tgz Creating package py3-jellyfish-1.1.0p1 reading plist| checking dependencies| checking dependencies|lang/python/3,-main checksumming| checksumming| | 0% checksumming|** | 3% checksumming|**** | 6% checksumming|****** | 10% checksumming|******** | 13% checksumming|********** | 16% checksumming|************ | 19% checksumming|************** | 23% checksumming|**************** | 26% checksumming|****************** | 29% checksumming|******************** | 32% checksumming|********************** | 35% checksumming|************************ | 39% checksumming|************************** | 42% checksumming|**************************** | 45% checksumming|****************************** | 48% checksumming|******************************* | 52% checksumming|********************************* | 55% checksumming|*********************************** | 58% checksumming|************************************* | 61% checksumming|*************************************** | 65% checksumming|***************************************** | 68% checksumming|******************************************* | 71% checksumming|********************************************* | 74% checksumming|*********************************************** | 77% checksumming|************************************************* | 81% checksumming|*************************************************** | 84% checksumming|***************************************************** | 87% checksumming|******************************************************* | 90% checksumming|********************************************************* | 94% checksumming|*********************************************************** | 97% checksumming|*************************************************************|100% archiving| archiving| | 0% archiving|* | 1% archiving|**************************** | 44% archiving|***************************** | 45% archiving|***************************** | 46% archiving|****************************************************************|100% Link to /exopi-cvs/ports/packages/amd64/ftp/py3-jellyfish-1.1.0p1.tgz >>> Running clean in textproc/py-jellyfish at 1735150113.05 ===> textproc/py-jellyfish ===> Cleaning for py3-jellyfish-1.1.0p1 >>> Ended at 1735150113.66 max_stuck=11.90/depends=4.67/show-prepare-results=1.94/build=98.67/package=5.66/clean=0.66