>>> Building on exopi-2 under cad/freecad BDEPENDS = [x11/qt6/pyside6/pyside;devel/boost;devel/ninja;graphics/pcl;x11/qt6/pyside6/tools;devel/fmt;math/flann;devel/swig;x11/qt6/pyside6/shiboken;graphics/py-matplotlib;devel/gtest;math/qhull;devel/yaml-cpp;graphics/shaderc;math/eigen3;math/exprtk;cad/opencascade;devel/py-pybind11;devel/cmake/core;devel/utfcpp;x11/qt6/qtsvg;graphics/glslang;graphics/vulkan-loader;x11/qt6/qtbase;graphics/coin;math/med;devel/microsoft-gsl;graphics/vtk;textproc/nlohmann-json;graphics/py-pivy;cad/netgen-mesher;devel/libusb1;textproc/xerces-c;lang/python/3;x11/qt6/qttools;devel/dwz;math/hdf5] DIST = [cad/freecad:freecad_source_1.1.0.tar.gz] FULLPKGNAME = freecad-1.1.0 RDEPENDS = [cad/opencascade;graphics/py-matplotlib;x11/qt6/pyside6/shiboken;devel/py-ply;devel/yaml-cpp;graphics/pcl;x11/gtk+4,-guic;devel/fmt;x11/qt6/pyside6/pyside;math/hdf5;graphics/py-pivy;graphics/vtk;textproc/xerces-c;lang/python/3;cad/netgen-mesher;misc/shared-mime-info;x11/qt6/qtbase;graphics/coin;devel/desktop-file-utils;textproc/py-yaml;math/med;x11/qt6/qtsvg;devel/py-typing-extensions] (Junk lock failure for exopi-2 at 1779079471.95756) Received IO (Junk lock obtained for exopi-2 at 1779079503.57) Received IO Woken up cad/freecad >>> Running depends in cad/freecad at 1779079505.50 last junk was in astro/kstars /usr/sbin/pkg_add -aI -Drepair coin-4.0.8 exprtk-0.0.3p0 flann-1.9.2p1 fmt-11.2.0 glslang-16.2.0 gtest-1.15.2 hdf5-1.14.6p1 libusb1-1.0.29 med-5.0.0p2 microsoft-gsl-4.2.1p0 netgen-mesher-6.2.2602 nlohmann-json-3.12.0 opencascade-7.9.3 pcl-1.15.1p0 py3-matplotlib-3.10.8 py3-pivy-0.6.11 py3-pybind11-3.0.3v0 pyside6-6.10.2 pyside6-tools-6.10.2 python-3.14.4p1 qhull-2020.2 shaderc-2025.5p0 shiboken6-6.10.2 swig-4.4.1 utfcpp-4.0.6 vtk-9.6.0 xerces-c-3.3.0 yaml-cpp-0.8.0 was: /usr/sbin/pkg_add -aI -Drepair boost-1.89.0p2v0 cmake-core-4.2.3 coin-4.0.8 dwz-0.16p1 eigen3-3.4.0p0 exprtk-0.0.3p0 flann-1.9.2p1 fmt-11.2.0 glslang-16.2.0 gtest-1.15.2 hdf5-1.14.6p1 libusb1-1.0.29 med-5.0.0p2 microsoft-gsl-4.2.1p0 netgen-mesher-6.2.2602 ninja-1.11.1p1v1 nlohmann-json-3.12.0 opencascade-7.9.3 pcl-1.15.1p0 py3-matplotlib-3.10.8 py3-pivy-0.6.11 py3-pybind11-3.0.3v0 pyside6-6.10.2 pyside6-tools-6.10.2 python-3.14.4p1 qhull-2020.2 qt6-qtbase-6.10.2 qt6-qtsvg-6.10.2 qt6-qttools-6.10.2 shaderc-2025.5p0 shiboken6-6.10.2 swig-4.4.1 utfcpp-4.0.6 vtk-9.6.0 vulkan-loader-1.4.341.0 xerces-c-3.3.0 yaml-cpp-0.8.0 /usr/sbin/pkg_add -aI -Drepair coin-4.0.8 exprtk-0.0.3p0 flann-1.9.2p1 fmt-11.2.0 glslang-16.2.0 gtest-1.15.2 hdf5-1.14.6p1 libusb1-1.0.29 med-5.0.0p2 microsoft-gsl-4.2.1p0 netgen-mesher-6.2.2602 nlohmann-json-3.12.0 opencascade-7.9.3 pcl-1.15.1p0 py3-matplotlib-3.10.8 py3-pivy-0.6.11 py3-pybind11-3.0.3v0 pyside6-6.10.2 pyside6-tools-6.10.2 python-3.14.4p1 qhull-2020.2 shaderc-2025.5p0 shiboken6-6.10.2 swig-4.4.1 utfcpp-4.0.6 vtk-9.6.0 xerces-c-3.3.0 yaml-cpp-0.8.0 The following new rcscripts were installed: /etc/rc.d/pcscd See rcctl(8) for details. New and changed readme(s): /usr/local/share/doc/pkg-readmes/proj /usr/local/share/doc/pkg-readmes/tcl-8.6 --- +tcl-8.6.18 ------------------- You may wish to add /usr/local/lib/tcl/tcl8.6/man to /etc/man.conf --- +tk-8.6.18 ------------------- You may wish to add /usr/local/lib/tcl/tk8.6/man to /etc/man.conf >>> Running show-prepare-results in cad/freecad at 1779079573.65 ===> cad/freecad ===> Building from scratch freecad-1.1.0 ===> freecad-1.1.0 depends on: netgen-mesher-* -> netgen-mesher-6.2.2602 ===> freecad-1.1.0 depends on: boost-* -> boost-1.89.0p2v0 ===> freecad-1.1.0 depends on: gtest-* -> gtest-1.15.2 ===> freecad-1.1.0 depends on: microsoft-gsl-* -> microsoft-gsl-4.2.1p0 ===> freecad-1.1.0 depends on: py3-pybind11-* -> py3-pybind11-3.0.3v0 ===> freecad-1.1.0 depends on: swig-* -> swig-4.4.1 ===> freecad-1.1.0 depends on: py3-matplotlib-* -> py3-matplotlib-3.10.8 ===> freecad-1.1.0 depends on: py3-pivy-* -> py3-pivy-0.6.11 ===> freecad-1.1.0 depends on: eigen3-* -> eigen3-3.4.0p0 ===> freecad-1.1.0 depends on: nlohmann-json-* -> nlohmann-json-3.12.0 ===> freecad-1.1.0 depends on: pyside6-tools-* -> pyside6-tools-6.10.2 ===> freecad-1.1.0 depends on: libusb1-* -> libusb1-1.0.29 ===> freecad-1.1.0 depends on: utfcpp-* -> utfcpp-4.0.6 ===> freecad-1.1.0 depends on: glslang-* -> glslang-16.2.0 ===> freecad-1.1.0 depends on: shaderc-* -> shaderc-2025.5p0 ===> freecad-1.1.0 depends on: exprtk-* -> exprtk-0.0.3p0 ===> freecad-1.1.0 depends on: flann-* -> flann-1.9.2p1 ===> freecad-1.1.0 depends on: qhull-* -> qhull-2020.2 ===> freecad-1.1.0 depends on: cmake-core->=4 -> cmake-core-4.2.3 ===> freecad-1.1.0 depends on: ninja-* -> ninja-1.11.1p1v1 ===> freecad-1.1.0 depends on: python->=3.14 -> python-3.14.4p1 ===> freecad-1.1.0 depends on: vulkan-loader-* -> vulkan-loader-1.4.341.0 ===> freecad-1.1.0 depends on: qt6-qttools->=6.10.2,<6.11.0 -> qt6-qttools-6.10.2 ===> freecad-1.1.0 depends on: dwz-* -> dwz-0.16p1 ===> freecad-1.1.0 depends on: opencascade-* -> opencascade-7.9.3 ===> freecad-1.1.0 depends on: fmt-* -> fmt-11.2.0 ===> freecad-1.1.0 depends on: yaml-cpp-* -> yaml-cpp-0.8.0 ===> freecad-1.1.0 depends on: coin-* -> coin-4.0.8 ===> freecad-1.1.0 depends on: pcl-* -> pcl-1.15.1p0 ===> freecad-1.1.0 depends on: vtk-* -> vtk-9.6.0 ===> freecad-1.1.0 depends on: hdf5-* -> hdf5-1.14.6p1 ===> freecad-1.1.0 depends on: med-* -> med-5.0.0p2 ===> freecad-1.1.0 depends on: xerces-c-* -> xerces-c-3.3.0 ===> freecad-1.1.0 depends on: pyside6-* -> pyside6-6.10.2 ===> freecad-1.1.0 depends on: shiboken6-* -> shiboken6-6.10.2 ===> freecad-1.1.0 depends on: qt6-qtsvg->=6.10.2,<6.11.0 -> qt6-qtsvg-6.10.2 ===> freecad-1.1.0 depends on: qt6-qtbase->=6.10.2,<6.11.0 -> qt6-qtbase-6.10.2 ===> Verifying specs: c++ c++abi pthread Coin GL GLU Qt6Concurrent Qt6Core Qt6Gui Qt6Network Qt6OpenGL Qt6OpenGLWidgets Qt6PrintSupport Qt6Svg Qt6SvgWidgets Qt6UiTools Qt6Widgets Qt6Xml TKBO TKBRep TKBin TKBinL TKBool TKCAF TKCDF TKDE TKDEGLTF TKDEIGES TKDESTEP TKDESTL TKExpress TKFeat TKFillet TKG2d TKG3d TKGeomAlgo TKGeomBase TKHLR TKLCAF TKMath TKMesh TKMeshVS TKOffset TKPrim TKRWMesh TKService TKShHealing TKTopAlgo TKV3d TKVCAF TKXCAF TKXSBase TKernel boost_atomic-mt boost_chrono-mt boost_container-mt boost_date_time-mt boost_filesystem-mt boost_iostreams-mt boost_program_options-mt boost_random-mt boost_regex-mt boost_serialization-mt boost_thread-mt c execinfo fmt freetype hdf5 hdf5_hl icui18n icuuc m med medC pcl_common pcl_features pcl_filters pcl_kdtree pcl_ml pcl_octree pcl_sample_consensus pcl_search pcl_segmentation pcl_surface pyside6.abi3 python3.14 scn shiboken6.abi3 vtkCommonCore vtkCommonDataModel vtkCommonExecutionModel vtkCommonMath vtkCommonMisc vtkCommonTransforms vtkFiltersCellGrid vtkFiltersCore vtkFiltersExtraction vtkFiltersGeneral vtkFiltersGeometry vtkFiltersSources vtkFiltersVerdict vtkIOCellGrid vtkIOCore vtkIOImage vtkIOLegacy vtkIOXML vtkIOXMLParser vtkImagingCore vtkInteractionStyle vtkRenderingCore vtkRenderingFreeType vtkRenderingHyperTreeGrid vtkRenderingOpenGL2 vtkRenderingUI vtkglad vtkkissfft vtksys vtktoken vtkx11 xerces-c yaml-cpp z ===> found c++.12.0 c++abi.9.0 pthread.28.1 Coin.1.0 GL.19.2 GLU.9.0 Qt6Concurrent.0.1 Qt6Core.7.0 Qt6Gui.9.0 Qt6Network.5.0 Qt6OpenGL.3.0 Qt6OpenGLWidgets.1.0 Qt6PrintSupport.1.1 Qt6Svg.4.0 Qt6SvgWidgets.1.1 Qt6UiTools.2.0 Qt6Widgets.5.0 Qt6Xml.1.0 TKBO.3.0 TKBRep.3.0 TKBin.3.0 TKBinL.3.0 TKBool.3.0 TKCAF.3.0 TKCDF.3.0 TKDE.3.0 TKDEGLTF.3.0 TKDEIGES.3.0 TKDESTEP.3.0 TKDESTL.3.0 TKExpress.3.0 TKFeat.3.0 TKFillet.3.0 TKG2d.3.0 TKG3d.3.0 TKGeomAlgo.3.0 TKGeomBase.3.0 TKHLR.3.0 TKLCAF.3.0 TKMath.3.0 TKMesh.3.0 TKMeshVS.3.0 TKOffset.3.0 TKPrim.3.0 TKRWMesh.3.0 TKService.3.0 TKShHealing.3.0 TKTopAlgo.3.0 TKV3d.3.0 TKVCAF.3.0 TKXCAF.3.0 TKXSBase.3.0 TKernel.3.0 boost_atomic-mt.26.0 boost_chrono-mt.26.0 boost_container-mt.26.0 boost_date_time-mt.26.0 boost_filesystem-mt.26.0 boost_iostreams-mt.26.0 boost_program_options-mt.26.0 boost_random-mt.26.0 boost_regex-mt.26.0 boost_serialization-mt.26.0 boost_thread-mt.26.0 c.103.0 execinfo.4.0 fmt.2.1 freetype.31.1 hdf5.8.0 hdf5_hl.7.0 icui18n.23.0 icuuc.23.0 m.10.1 med.0.0 medC.0.0 pcl_common.2.0 pcl_features.2.0 pcl_filters.2.0 pcl_kdtree.2.0 pcl_ml.2.0 pcl_octree.2.0 pcl_sample_consensus.2.0 pcl_search.2.0 pcl_segmentation.2.0 pcl_surface.2.0 pyside6.abi3.2.0 python3.14.0.0 scn.0.0 shiboken6.abi3.2.0 vtkCommonCore.4.0 vtkCommonDataModel.4.0 vtkCommonExecutionModel.4.0 vtkCommonMath.4.0 vtkCommonMisc.4.0 vtkCommonTransforms.4.0 vtkFiltersCellGrid.4.0 vtkFiltersCore.4.0 vtkFiltersExtraction.4.0 vtkFiltersGeneral.4.0 vtkFiltersGeometry.4.0 vtkFiltersSources.4.0 vtkFiltersVerdict.4.0 vtkIOCellGrid.4.0 vtkIOCore.4.0 vtkIOImage.4.0 vtkIOLegacy.4.0 vtkIOXML.4.0 vtkIOXMLParser.4.0 vtkImagingCore.4.0 vtkInteractionStyle.4.0 vtkRenderingCore.4.0 vtkRenderingFreeType.4.0 vtkRenderingHyperTreeGrid.4.0 vtkRenderingOpenGL2.4.0 vtkRenderingUI.4.0 vtkglad.4.0 vtkkissfft.4.0 vtksys.4.0 vtktoken.4.0 vtkx11.4.0 xerces-c.2.0 yaml-cpp.5.0 z.7.2 boost-1.89.0p2v0 cmake-core-4.2.3 coin-4.0.8 dwz-0.16p1 eigen3-3.4.0p0 exprtk-0.0.3p0 flann-1.9.2p1 fmt-11.2.0 glslang-16.2.0 gtest-1.15.2 hdf5-1.14.6p1 libusb1-1.0.29 med-5.0.0p2 microsoft-gsl-4.2.1p0 netgen-mesher-6.2.2602 ninja-1.11.1p1v1 nlohmann-json-3.12.0 opencascade-7.9.3 pcl-1.15.1p0 py3-matplotlib-3.10.8 py3-pivy-0.6.11 py3-pybind11-3.0.3v0 pyside6-6.10.2 pyside6-tools-6.10.2 python-3.14.4p1 qhull-2020.2 qt6-qtbase-6.10.2 qt6-qtsvg-6.10.2 qt6-qttools-6.10.2 shaderc-2025.5p0 shiboken6-6.10.2 swig-4.4.1 utfcpp-4.0.6 vtk-9.6.0 vulkan-loader-1.4.341.0 xerces-c-3.3.0 yaml-cpp-0.8.0 (Junk lock released for exopi-2 at 1779079579.91) distfiles size=98114570 >>> Running patch in cad/freecad at 1779079579.95 ===> cad/freecad ===> Checking files for freecad-1.1.0 `/exopi-cvs/ports/distfiles/freecad_source_1.1.0.tar.gz' is up to date. >> (SHA256) all files: OK ===> Extracting for freecad-1.1.0 rm -r /exopi-obj/pobj/freecad-1.1.0/src/3rdParty/GSL ===> Patching for freecad-1.1.0 ===> Applying OpenBSD patch patch-cMake_FreeCAD_Helpers_SetupSalomeSMESH_cmake Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |OpenMPI is only needed if devel/med was compiled with support for it. | |Index: cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake |--- cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake.orig |+++ cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake -------------------------- Patching file cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake using Plan A... Hunk #1 succeeded at 131. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: src/3rdParty/salomesmesh/CMakeLists.txt |--- src/3rdParty/salomesmesh/CMakeLists.txt.orig |+++ src/3rdParty/salomesmesh/CMakeLists.txt -------------------------- Patching file src/3rdParty/salomesmesh/CMakeLists.txt using Plan A... Hunk #1 succeeded at 134. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_inc_SMDS_MeshElement_hxx Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx |--- src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx.orig |+++ src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx -------------------------- Patching file src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx using Plan A... Hunk #1 succeeded at 45. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_inc_SMDS_UnstructuredGrid_hxx Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 |Commit: c9acda2a659f9ac079fefd2c0b8d6ff9c8a8238e | |Index: src/3rdParty/salomesmesh/inc/SMDS_UnstructuredGrid.hxx |--- src/3rdParty/salomesmesh/inc/SMDS_UnstructuredGrid.hxx.orig |+++ src/3rdParty/salomesmesh/inc/SMDS_UnstructuredGrid.hxx -------------------------- Patching file src/3rdParty/salomesmesh/inc/SMDS_UnstructuredGrid.hxx using Plan A... Hunk #1 succeeded at 28. Hunk #2 succeeded at 96. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_BallElement_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp using Plan A... Hunk #1 succeeded at 67. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_Mesh0DElement_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp using Plan A... Hunk #1 succeeded at 146. Hunk #2 succeeded at 155. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_MeshNode_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: c9acda2a659f9ac079fefd2c0b8d6ff9c8a8238e | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp using Plan A... Hunk #1 succeeded at 31. Hunk #2 succeeded at 70. Hunk #3 succeeded at 196. Hunk #4 succeeded at 260. Hunk #5 succeeded at 363. Hunk #6 succeeded at 383. Hunk #7 succeeded at 399. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_Mesh_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 |Commit: c9acda2a659f9ac079fefd2c0b8d6ff9c8a8238e |Commit: 3a68d91ae306d88703d203d2ac8d41b2e5ce12dd | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp using Plan A... Hunk #1 succeeded at 53. Hunk #2 succeeded at 284. Hunk #3 succeeded at 348. Hunk #4 succeeded at 636. Hunk #5 succeeded at 747. Hunk #6 succeeded at 864. Hunk #7 succeeded at 1003. Hunk #8 succeeded at 1129. Hunk #9 succeeded at 1336. Hunk #10 succeeded at 1405. Hunk #11 succeeded at 1489. Hunk #12 succeeded at 1549. Hunk #13 succeeded at 1612. Hunk #14 succeeded at 1764. Hunk #15 succeeded at 1822. Hunk #16 succeeded at 2157. Hunk #17 succeeded at 3372. Hunk #18 succeeded at 3481. Hunk #19 succeeded at 3667. Hunk #20 succeeded at 3754. Hunk #21 succeeded at 3845. Hunk #22 succeeded at 3940. Hunk #23 succeeded at 4038. Hunk #24 succeeded at 4145. Hunk #25 succeeded at 4264. Hunk #26 succeeded at 4395. Hunk #27 succeeded at 4546. Hunk #28 succeeded at 4730. Hunk #29 succeeded at 4821. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_UnstructuredGrid_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 |Commit: ff3e419d2ea4603ed8a28d3777f0d75b2a2af194 |Commit: 3a68d91ae306d88703d203d2ac8d41b2e5ce12dd |Commit: 261ca3905b47b251b0751fd7af45ad5c3fd129e4 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp using Plan A... Hunk #1 succeeded at 193. Hunk #2 succeeded at 214. Hunk #3 succeeded at 242. Hunk #4 succeeded at 250. Hunk #5 succeeded at 327. Hunk #6 succeeded at 362. Hunk #7 succeeded at 399. Hunk #8 succeeded at 407. Hunk #9 succeeded at 420. Hunk #10 succeeded at 1028. Hunk #11 succeeded at 1041. Hunk #12 succeeded at 1070. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_VtkCellIterator_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: 6d4ce9e9b84963688e283adaf775ed40d5d775a1 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp using Plan A... Hunk #1 succeeded at 182. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_VtkEdge_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp using Plan A... Hunk #1 succeeded at 67. Hunk #2 succeeded at 78. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_VtkFace_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp using Plan A... Hunk #1 succeeded at 101. Hunk #2 succeeded at 112. Hunk #3 succeeded at 357. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMDS_SMDS_VtkVolume_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 |Commit: 6d4ce9e9b84963688e283adaf775ed40d5d775a1 | |Index: src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp |--- src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp using Plan A... Hunk #1 succeeded at 133. Hunk #2 succeeded at 144. Hunk #3 succeeded at 205. Hunk #4 succeeded at 235. Hunk #5 succeeded at 276. Hunk #6 succeeded at 313. Hunk #7 succeeded at 344. Hunk #8 succeeded at 375. Hunk #9 succeeded at 434. Hunk #10 succeeded at 466. done ===> Applying OpenBSD patch patch-src_3rdParty_salomesmesh_src_SMESH_SMESH_MeshEditor_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: c9acda2a659f9ac079fefd2c0b8d6ff9c8a8238e | |Index: src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp |--- src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp.orig |+++ src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp -------------------------- Patching file src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp using Plan A... Hunk #1 succeeded at 57. Hunk #2 succeeded at 11349. Hunk #3 succeeded at 11713. done ===> Applying OpenBSD patch patch-src_Gui_View3DInventor_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: ee09d4e696aa530e100b840428ab9c358032c744 | |Index: src/Gui/View3DInventor.cpp |--- src/Gui/View3DInventor.cpp.orig |+++ src/Gui/View3DInventor.cpp -------------------------- Patching file src/Gui/View3DInventor.cpp using Plan A... Hunk #1 succeeded at 604. done ===> Applying OpenBSD patch patch-src_Gui_ViewProviderLink_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: ee09d4e696aa530e100b840428ab9c358032c744 | |Index: src/Gui/ViewProviderLink.cpp |--- src/Gui/ViewProviderLink.cpp.orig |+++ src/Gui/ViewProviderLink.cpp -------------------------- Patching file src/Gui/ViewProviderLink.cpp using Plan A... Hunk #1 succeeded at 1624. done ===> Applying OpenBSD patch patch-src_Gui_ViewProvider_h Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: ee09d4e696aa530e100b840428ab9c358032c744 | |Index: src/Gui/ViewProvider.h |--- src/Gui/ViewProvider.h.orig |+++ src/Gui/ViewProvider.h -------------------------- Patching file src/Gui/ViewProvider.h using Plan A... Hunk #1 succeeded at 87. done ===> Applying OpenBSD patch patch-src_Mod_Fem_App_FemPostPipeline_h Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: c9acda2a659f9ac079fefd2c0b8d6ff9c8a8238e | |Index: src/Mod/Fem/App/FemPostPipeline.h |--- src/Mod/Fem/App/FemPostPipeline.h.orig |+++ src/Mod/Fem/App/FemPostPipeline.h -------------------------- Patching file src/Mod/Fem/App/FemPostPipeline.h using Plan A... Hunk #1 succeeded at 32. done ===> Applying OpenBSD patch patch-src_Mod_Fem_App_PreCompiled_h Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: c9acda2a659f9ac079fefd2c0b8d6ff9c8a8238e | |Index: src/Mod/Fem/App/PreCompiled.h |--- src/Mod/Fem/App/PreCompiled.h.orig |+++ src/Mod/Fem/App/PreCompiled.h -------------------------- Patching file src/Mod/Fem/App/PreCompiled.h using Plan A... Hunk #1 succeeded at 151. done ===> Applying OpenBSD patch patch-src_Mod_Fem_App_PropertyPostDataObject_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/Mod/Fem/App/PropertyPostDataObject.cpp |--- src/Mod/Fem/App/PropertyPostDataObject.cpp.orig |+++ src/Mod/Fem/App/PropertyPostDataObject.cpp -------------------------- Patching file src/Mod/Fem/App/PropertyPostDataObject.cpp using Plan A... Hunk #1 succeeded at 400. done ===> Applying OpenBSD patch patch-src_Mod_Fem_Gui_ViewProviderFemPostObject_cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |This patch has been merged upstream. Drop next update. |Commit: bd90728f886bbeb6d69aafd4f68f934109b96f91 | |Index: src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp |--- src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp.orig |+++ src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp -------------------------- Patching file src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp using Plan A... Hunk #1 succeeded at 75. done ===> Applying OpenBSD patch patch-src_Mod_Part_App_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: src/Mod/Part/App/CMakeLists.txt |--- src/Mod/Part/App/CMakeLists.txt.orig |+++ src/Mod/Part/App/CMakeLists.txt -------------------------- Patching file src/Mod/Part/App/CMakeLists.txt using Plan A... Hunk #1 succeeded at 23. done ===> Applying OpenBSD patch patch-src_Tools_freecad-thumbnailer_in Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: src/Tools/freecad-thumbnailer.in |--- src/Tools/freecad-thumbnailer.in.orig |+++ src/Tools/freecad-thumbnailer.in -------------------------- Patching file src/Tools/freecad-thumbnailer.in using Plan A... Hunk #1 succeeded at 1. done ===> Applying OpenBSD patch patch-tests_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/CMakeLists.txt |--- tests/CMakeLists.txt.orig |+++ tests/CMakeLists.txt -------------------------- Patching file tests/CMakeLists.txt using Plan A... Hunk #1 succeeded at 157. done ===> Applying OpenBSD patch patch-tests_src_Mod_Assembly_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Assembly/CMakeLists.txt |--- tests/src/Mod/Assembly/CMakeLists.txt.orig |+++ tests/src/Mod/Assembly/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Assembly/CMakeLists.txt using Plan A... Hunk #1 succeeded at 9. done ===> Applying OpenBSD patch patch-tests_src_Mod_Material_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Material/CMakeLists.txt |--- tests/src/Mod/Material/CMakeLists.txt.orig |+++ tests/src/Mod/Material/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Material/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_Measure_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Measure/CMakeLists.txt |--- tests/src/Mod/Measure/CMakeLists.txt.orig |+++ tests/src/Mod/Measure/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Measure/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_MeshPart_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/MeshPart/CMakeLists.txt |--- tests/src/Mod/MeshPart/CMakeLists.txt.orig |+++ tests/src/Mod/MeshPart/CMakeLists.txt -------------------------- Patching file tests/src/Mod/MeshPart/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_Mesh_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Mesh/CMakeLists.txt |--- tests/src/Mod/Mesh/CMakeLists.txt.orig |+++ tests/src/Mod/Mesh/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Mesh/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_PartDesign_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/PartDesign/CMakeLists.txt |--- tests/src/Mod/PartDesign/CMakeLists.txt.orig |+++ tests/src/Mod/PartDesign/CMakeLists.txt -------------------------- Patching file tests/src/Mod/PartDesign/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_Part_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Part/CMakeLists.txt |--- tests/src/Mod/Part/CMakeLists.txt.orig |+++ tests/src/Mod/Part/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Part/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_Points_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Points/CMakeLists.txt |--- tests/src/Mod/Points/CMakeLists.txt.orig |+++ tests/src/Mod/Points/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Points/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Applying OpenBSD patch patch-tests_src_Mod_Sketcher_CMakeLists_txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: tests/src/Mod/Sketcher/CMakeLists.txt |--- tests/src/Mod/Sketcher/CMakeLists.txt.orig |+++ tests/src/Mod/Sketcher/CMakeLists.txt -------------------------- Patching file tests/src/Mod/Sketcher/CMakeLists.txt using Plan A... Hunk #1 succeeded at 3. done ===> Compiler link: clang -> /usr/bin/clang ===> Compiler link: clang++ -> /usr/bin/clang++ ===> Compiler link: cc -> /usr/bin/cc ===> Compiler link: c++ -> /usr/bin/c++ >>> Running configure in cad/freecad at 1779079586.73 ===> cad/freecad ===> Generating configure for freecad-1.1.0 ===> Configuring for freecad-1.1.0 cp /exopi-cvs/ports/cad/freecad/files/Version.h /exopi-obj/pobj/freecad-1.1.0/src/Build /usr/bin/perl /exopi-cvs/ports/infrastructure/bin/pkg_subst -DMODPY_PYCACHE=__pycache__/ -DMODPY_ABI3SO=.abi3 -DMODPY_PYC_MAGIC_TAG=cpython-314. -DMODPY_BIN=/usr/local/bin/python3.14 -DMODPY_DISTV= -DMODPY_VERSION=3.14 -DMODPY_PY_PREFIX=py3- -DMODPY_PYOEXTENSION=opt-1.pyc -DMODCMAKE_BUILD_SUFFIX=-release.cmake -DLIBOndselSolver_VERSION=2.0 -DLIBE57Format_VERSION=0.0 -DARCH=amd64 -DBASE_PKGPATH=cad/freecad -DFLAVOR_EXT= -DFULLPKGNAME=freecad-1.1.0 -DHOMEPAGE=https://www.freecad.org/ -DLOCALBASE=/usr/local -DLOCALSTATEDIR=/var -DMACHINE_ARCH=amd64 -DMAINTAINER=Johannes\ Thyssen\ Tishman\ \ -DPREFIX=/usr/local -DRCDIR=/etc/rc.d -DSYSCONFDIR=/etc -DTRUEPREFIX=/usr/local -DX11BASE=/usr/X11R6 -DPKGSTEM=freecad -i -B /exopi-obj/pobj/freecad-1.1.0 /exopi-obj/pobj/freecad-1.1.0/src/3rdParty/salomesmesh/CMakeLists.txt /exopi-obj/pobj/freecad-1.1.0/src/Mod/Part/App/CMakeLists.txt /exopi-obj/pobj/freecad-1.1.0/src/Tools/freecad-thumbnailer.in /exopi-obj/pobj/freecad-1.1.0/tests/CMakeLists.txt -- The C compiler identification is Clang 19.1.7 -- The CXX compiler identification is Clang 19.1.7 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /exopi-obj/pobj/freecad-1.1.0/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /exopi-obj/pobj/freecad-1.1.0/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Compiler: Clang, version: 19.1.7 -- Looking for GL/gl.h -- Looking for GL/gl.h - not found -- Looking for C++ include istream -- Looking for C++ include istream - found -- Looking for C++ include ostream -- Looking for C++ include ostream - found -- Looking for C++ include fstream -- Looking for C++ include fstream - found -- Looking for C++ include sstream -- Looking for C++ include sstream - found -- Looking for C++ include ios -- Looking for C++ include ios - found -- Looking for C++ include iostream -- Looking for C++ include iostream - found -- Looking for C++ include iomanip -- Looking for C++ include iomanip - found -- Looking for C++ include iostream -- Looking for C++ include iostream - found -- Check for STD namespace -- Check for STD namespace - found -- Force BOOST_PP_VARIADICS=1 for clang -- prefix: /usr/local/lib/freecad -- bindir: /usr/local/lib/freecad/bin -- datadir: /usr/local/share/freecad -- docdir: /usr/local/share/doc/freecad -- includedir: include -- libdir: /usr/local/lib/freecad/lib -- cmake: 4.2.3 -- Compiling with Qt 6 ===================================================== Doxygen not found, will not build documentation. ===================================================== -- find_package() was used to locate fmt version 11.2.0 -- Found ICU: /usr/local/include (found version "78.3") found components: uc i18n -- Found Python3: /usr/local/bin/python3.14 (found version "3.14.4") found components: Interpreter Development Development.Module Development.Embed -- Found PkgConfig: /usr/bin/pkg-config (found version "2.4.3") -- Found flann version 1.9.2 -- Found Qhull version 8.0.2 -- Found Pcap: /usr/lib/libpcap.so.10.0 -- Found ZLIB: /usr/lib/libz.so.7.2 (found version "1.3.2") -- Found PNG: /usr/local/lib/libpng.so.18.2 (found version "1.6.58") -- Checking for module 'libusb-1.0' -- Found libusb-1.0, version 1.0.29 -- Found libusb: /usr/local/lib/libusb-1.0.so.2.2 -- looking for PCL_COMMON -- Found PCL_COMMON: /usr/local/lib/libpcl_common.so.2.0 -- looking for PCL_KDTREE -- Found PCL_KDTREE: /usr/local/lib/libpcl_kdtree.so.2.0 -- looking for PCL_OCTREE -- Found PCL_OCTREE: /usr/local/lib/libpcl_octree.so.2.0 -- looking for PCL_SEARCH -- Found PCL_SEARCH: /usr/local/lib/libpcl_search.so.2.0 -- looking for PCL_2D -- Found PCL_2D: /usr/local/include/pcl-1.15 -- looking for PCL_FEATURES -- Found PCL_FEATURES: /usr/local/lib/libpcl_features.so.2.0 -- looking for PCL_SURFACE -- Found PCL_SURFACE: /usr/local/lib/libpcl_surface.so.2.0 -- looking for PCL_IO_PLY -- Found PCL_IO_PLY: /usr/local/lib/libpcl_io_ply.so.2.0 -- looking for PCL_IO -- Found PCL_IO: /usr/local/lib/libpcl_io.so.2.0 -- looking for PCL_FILTERS -- Found PCL_FILTERS: /usr/local/lib/libpcl_filters.so.2.0 -- looking for PCL_GEOMETRY -- Found PCL_GEOMETRY: /usr/local/include/pcl-1.15 -- looking for PCL_ML -- Found PCL_ML: /usr/local/lib/libpcl_ml.so.2.0 -- looking for PCL_SEGMENTATION -- Found PCL_SEGMENTATION: /usr/local/lib/libpcl_segmentation.so.2.0 -- looking for PCL_SAMPLE_CONSENSUS -- Found PCL_SAMPLE_CONSENSUS: /usr/local/lib/libpcl_sample_consensus.so.2.0 -- Found PCL: pcl_common;pcl_kdtree;pcl_octree;pcl_search;pcl_features;pcl_surface;pcl_io_ply;pcl_io;pcl_filters;pcl_ml;pcl_segmentation;pcl_sample_consensus;Boost::system;Boost::iostreams;Boost::filesystem;Boost::serialization;FLANN::FLANN;QHULL::QHULL -- Performing Test HAS_FLTO_THIN -- Performing Test HAS_FLTO_THIN - Success -- Performing Test HAS_FLTO -- Performing Test HAS_FLTO - Success -- Found pybind11: /usr/local/lib/python3.14/site-packages/pybind11/include (found version "3.0.3") -- Found XercesC: /usr/local/lib/libxerces-c.so.2.0 (found version "3.3.0") -- PyCXX found: -- Headers: /exopi-obj/pobj/freecad-1.1.0/src/3rdParty/PyCXX -- Sources: /exopi-obj/pobj/freecad-1.1.0/src/3rdParty/PyCXX/CXX -- Version: 7.1.11 -- Found OCC: /usr/local/include/opencascade (found version "7.9.3") -- Found OpenCASCADE version: 7.9.3 -- OpenCASCADE include directory: /usr/local/include/opencascade -- OpenCASCADE shared libraries directory: /usr/local/lib -- Found OpenGL: /usr/X11R6/lib/libGL.so.19.2 -- Found OpenGLU: /usr/X11R6/lib/libGLU.so.9.0 -- Found nlohmann_json: /usr/local/share/cmake/nlohmann_json/nlohmann_jsonConfig.cmake (found version "3.12.0") -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE CMake Warning at /usr/local/share/cmake/Modules/CMakeFindDependencyMacro.cmake:93 (find_package): By not providing "FindFastFloat.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "FastFloat", but CMake did not find one. Could not find a package configuration file provided by "FastFloat" with any of the following names: FastFloatConfig.cmake fastfloat-config.cmake Add the installation prefix of "FastFloat" to CMAKE_PREFIX_PATH or set "FastFloat_DIR" to a directory containing one of the above files. If "FastFloat" provides a separate development package or SDK, be sure it has been installed. Call Stack (most recent call first): /usr/local/share/cmake/Modules/CMakeFindDependencyMacro.cmake:125 (__find_dependency_common) /usr/local/lib/cmake/scn/scn-config.cmake:30 (find_dependency) /usr/local/lib/cmake/vtk/VTK-vtk-module-find-packages.cmake:1531 (find_package) /usr/local/lib/cmake/vtk/vtk-config.cmake:171 (include) cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:31 (find_package) CMakeLists.txt:96 (SetupSalomeSMESH) CMake Warning at /usr/local/lib/cmake/vtk/VTK-vtk-module-find-packages.cmake:1531 (find_package): Found package configuration file: /usr/local/lib/cmake/scn/scn-config.cmake but it set scn_FOUND to FALSE so package "scn" is considered to be NOT FOUND. Reason given by package: scn could not be found because dependency FastFloat could not be found. Call Stack (most recent call first): /usr/local/lib/cmake/vtk/vtk-config.cmake:171 (include) cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:31 (find_package) CMakeLists.txt:96 (SetupSalomeSMESH) -- VTK components: CommonCore;CommonDataModel;FiltersVerdict;IOXML;FiltersCore;FiltersGeneral;IOLegacy;FiltersExtraction;FiltersSources;FiltersGeometry;hdf5;RenderingCore;InteractionStyle;RenderingFreeType;RenderingOpenGL2 -- Could NOT find HDF5 (missing: HDF5_DIR) -- Found HDF5: /usr/local/lib/libhdf5.so.8.0;/usr/local/lib/libsz.so.0.0;/usr/lib/libz.so.7.2;/usr/lib/libm.so.10.1 (found version "1.14.6") found components: C HL -- Found utf8cpp: /usr/local/include/utf8cpp -- Found Eigen3: /usr/local/include/eigen3 (found version "3.4.0") -- Could NOT find freetype (missing: freetype_DIR) -- Found Freetype: /usr/X11R6/lib/libfreetype.so.31.1 (found version "2.14.2") -- Found Fontconfig: /usr/X11R6/lib/libfontconfig.so.14.1 (found version "2.17.1") -- Found X11: /usr/X11R6/include -- Looking for XOpenDisplay in /usr/X11R6/lib/libX11.so.19.0;/usr/X11R6/lib/libXext.so.13.0 -- Looking for XOpenDisplay in /usr/X11R6/lib/libX11.so.19.0;/usr/X11R6/lib/libXext.so.13.0 - found -- Looking for gethostbyname -- Looking for gethostbyname - found -- Looking for connect -- Looking for connect - found -- Looking for remove -- Looking for remove - found -- Looking for shmat -- Looking for shmat - found -- Looking for IceConnectionNumber in ICE -- Looking for IceConnectionNumber in ICE - found -- Found EXPAT: /usr/lib/libexpat.so.17.1 (found suitable version "2.8.1", minimum required is "2.2.1") -- Found JPEG: /usr/local/lib/libjpeg.so.71.0 (found version "62") -- Found TIFF: /usr/local/lib/cmake/tiff (found version "4.7.1") -- Found LZ4: /usr/local/lib/liblz4.so.3.3 (found version "1.10.0") -- Found LZMA: /usr/local/lib/liblzma.so.2.4 (found version "5.8.3") -- Could NOT find freetype (missing: freetype_DIR) -- Found ExprTk: /usr/local/include (found suitable version "2.718281828459045235360287471352662497757247093699959574966967627724076630353547594571382178525166427427466391932003059921817413596629043572900334295260595630738132", minimum required is "0.0.3") CMake Warning at /usr/local/share/cmake/Modules/CMakeFindDependencyMacro.cmake:93 (find_package): By not providing "FindFastFloat.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "FastFloat", but CMake did not find one. Could not find a package configuration file provided by "FastFloat" with any of the following names: FastFloatConfig.cmake fastfloat-config.cmake Add the installation prefix of "FastFloat" to CMAKE_PREFIX_PATH or set "FastFloat_DIR" to a directory containing one of the above files. If "FastFloat" provides a separate development package or SDK, be sure it has been installed. Call Stack (most recent call first): /usr/local/share/cmake/Modules/CMakeFindDependencyMacro.cmake:125 (__find_dependency_common) /usr/local/lib/cmake/scn/scn-config.cmake:30 (find_dependency) /usr/local/lib/cmake/vtk/VTK-vtk-module-find-packages.cmake:1531 (find_package) /usr/local/lib/cmake/vtk/vtk-config.cmake:171 (include) cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:59 (find_package) CMakeLists.txt:96 (SetupSalomeSMESH) CMake Warning at /usr/local/lib/cmake/vtk/VTK-vtk-module-find-packages.cmake:1531 (find_package): Found package configuration file: /usr/local/lib/cmake/scn/scn-config.cmake but it set scn_FOUND to FALSE so package "scn" is considered to be NOT FOUND. Reason given by package: scn could not be found because dependency FastFloat could not be found. Call Stack (most recent call first): /usr/local/lib/cmake/vtk/vtk-config.cmake:171 (include) cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:59 (find_package) CMakeLists.txt:96 (SetupSalomeSMESH) -- VTK python wrapper: NOT available -- Check for medfile (libmed and libmedc) ... -- Found MEDFile: /usr/local/include -- We guess that libmed was built using hdf5-serial version -- Checking for one of the modules 'hdf5-serial' -- Could NOT find HDF5 (missing: HDF5_DIR) -- Found HDF5: /usr/local/lib/libhdf5.so.8.0;/usr/local/lib/libsz.so.0.0;/usr/lib/libz.so.7.2;/usr/lib/libm.so.10.1 (found version "1.14.6") -- Found Netgen: /usr/local/lib/cmake/netgen -- Performing Test CSTDIO_INCLUDE_TRY1 -- Performing Test CSTDIO_INCLUDE_TRY1 - Success -- Found NETGEN version 6.2, calculated: 396330 -- Found SWIG: /usr/local/bin/swig (found version "4.4.1") -- checking SWIG/Pivy runtime compatibility... -- Looking for: /exopi-obj/pobj/freecad-1.1.0/build-amd64/swig_runtime_check.h -- File exists: YES -- SWIG_RUNTIME_VERSION_LINE: #define SWIG_RUNTIME_VERSION "5" -- Extracted SWIG_RUNTIME_VERSION: 5 -- SWIG/Pivy runtime compatibility: PASSED -- swig runtime API version: 5 -- pivy runtime API version: 5 -- swig binary version building freecad: 4.4.1 -- Found Eigen3: /usr/local/include/eigen3 (found suitable version "3.4.0", minimum required is "3.4.0") -- Check if compiler accepts -pthread -- Check if compiler accepts -pthread - yes -- Performing Test HAVE_STDATOMIC -- Performing Test HAVE_STDATOMIC - Success -- Found WrapAtomic: TRUE -- Found WrapOpenGL: TRUE -- Found Vulkan: /usr/local/lib/libvulkan.so.1.3 (found version "1.4.341") found components: glslc glslangValidator -- Found WrapVulkanHeaders: /usr/local/include -- Found Cups: /usr/local/lib/libcups.so.7.3 (found version "2.4.19") -- Set up to compile with Qt 6.10.2 -- Checking Pivy version by importing it in a Python program... -- Found Pivy 0.6.11 -- Checking Pivy Coin3D version by importing it in a Python program... -- Found Pivy Coin3D SIM Coin 4.0.8 -- Shiboken6Config: Using default python: .abi3 -- Found Python: /usr/local/bin/python3.14 (found suitable version "3.14.4", minimum required is "3") found components: Interpreter Development.Module -- PYTHON_LIMITED_LIBRARIES: -- SHIBOKEN_PYTHON_INCLUDE_DIRS computed to value: '/usr/local/include/python3.14' -- SHIBOKEN_PYTHON_LIBRARIES computed to value: '' -- libshiboken built for Release -- Found PYSIDE6 tools: /usr/local/lib/qt6/libexec/uic, /usr/local/lib/qt6/libexec/rcc -- PySide 6.10.2 Python module found at /usr/local/lib/python3.14/site-packages/PySide6. -- Found Matplotlib: /usr/local/lib/python3.14/site-packages/matplotlib (found version "3.10.8") -- Platform is 64-bit, set -D_OCC64 -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Using CMake 4.2.3 -- Found XercesC: /usr/local/lib/libxerces-c.so.2.0 (found suitable version "3.3.0", minimum required is "3.2") -- [E57Format] Revision ID: E57Format-3.2.0-amd64-Clang191 -- [E57Format] Building shared library -- Performing Test COMPILER_HAS_HIDDEN_VISIBILITY -- Performing Test COMPILER_HAS_HIDDEN_VISIBILITY - Success -- Performing Test COMPILER_HAS_HIDDEN_INLINE_VISIBILITY -- Performing Test COMPILER_HAS_HIDDEN_INLINE_VISIBILITY - Success -- Performing Test COMPILER_HAS_DEPRECATED_ATTR -- Performing Test COMPILER_HAS_DEPRECATED_ATTR - Success -- [E57Format] Setting validation level to 1 -- [E57Format] CMake files install to /usr/local/lib/freecad//usr/local/lib/freecad/lib/cmake/E57Format -- [OndselSolver] Building shared library -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/TypePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/BaseClassPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/BoundBoxPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/CoordinateSystemPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/PersistencePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/VectorPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/MatrixPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/RotationPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/PlacementPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/AxisPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/UnitPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/QuantityPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Base/PrecisionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/ApplicationDirectoriesPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/DocumentPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/DocumentObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/ExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/ExtensionContainerPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/DocumentObjectExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/GroupExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/LinkBaseExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/DocumentObjectGroupPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/GeoFeaturePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/GeoFeatureGroupExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/SuppressibleExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/MetadataPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/OriginGroupExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/PartPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/StringHasherPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/StringIDPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/ComplexGeoDataPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/PropertyContainerPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/MaterialPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/App/MeasureManagerPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/AssemblyObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/AssemblyLinkPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/BomObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/BomGroupPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/JointGroupPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/ViewGroupPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/App/SimulationGroupPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Assembly/Gui/ViewProviderAssemblyPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/App/FemMeshPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/App/FemPostObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/App/FemPostPipelinePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/App/FemPostFilterPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/App/FemPostBranchFilterPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/Gui/ViewProviderFemConstraintPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/Gui/ViewProviderFemPostPipelinePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Fem/Gui/ViewProviderFemPostFilterPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Import/App/StepShapePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/Array2DPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/Array3DPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/MaterialFilterPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/MaterialFilterOptionsPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/MaterialLibraryPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/MaterialManagerPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/MaterialPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/ModelManagerPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/ModelPropertyPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/MaterialPropertyPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/ModelPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/App/UUIDsPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Material/Gui/MaterialTreeWidgetPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Mesh/App/EdgePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Mesh/App/FacetPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Mesh/App/MeshFeaturePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Mesh/App/MeshPointPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Mesh/App/MeshPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Mesh/Gui/ViewProviderMeshPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ArcPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ArcOfConicPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ArcOfCirclePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ArcOfParabolaPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BodyBasePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ConicPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/CirclePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ArcOfEllipsePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/EllipsePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/HyperbolaPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ArcOfHyperbolaPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ParabolaPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/OffsetCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryIntExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryStringExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryBoolExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryDoubleExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometryCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BoundedCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TrimmedCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeometrySurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/LinePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/LineSegmentPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/PointPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BezierCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BSplineCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/PlanePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ConePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/CylinderPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/SpherePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ToroidPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BezierSurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BSplineSurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/OffsetSurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/PlateSurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/PartFeaturePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/AttachExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Part2DObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/AttachEnginePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeCompoundPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeCompSolidPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeEdgePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeFacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeShellPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeSolidPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeVertexPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/TopoShapeWirePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BRepOffsetAPI_MakeFillingPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/BRepFeat/MakePrismPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ChFi2d/ChFi2d_AnaFilletAlgoPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ChFi2d/ChFi2d_FilletAlgoPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ChFi2d/ChFi2d_ChamferAPIPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ChFi2d/ChFi2d_FilletAPIPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/ArcOfCircle2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/ArcOfConic2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/ArcOfParabola2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/BezierCurve2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/BSplineCurve2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Circle2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Conic2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Ellipse2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Geometry2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Hyperbola2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Curve2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Line2dSegmentPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Line2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/OffsetCurve2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/Geom2d/Parabola2dPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeomPlate/BuildPlateSurfacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeomPlate/CurveConstraintPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/GeomPlate/PointConstraintPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/HLRBRep/HLRBRep_AlgoPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/HLRBRep/HLRToShapePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/HLRBRep/HLRBRep_PolyAlgoPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/HLRBRep/PolyHLRToShapePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_RootPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_EdgePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_FacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_ShapePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_ShellPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_SolidPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_WirePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_WireframePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_WireVertexPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_EdgeConnectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_FaceConnectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_FixSmallFacePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_FixSmallSolidPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_FreeBoundsPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_ShapeTolerancePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_SplitCommonVertexPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeFix/ShapeFix_SplitToolPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/App/ShapeUpgrade/UnifySameDomainPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Part/Gui/ViewProviderPartExtPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/PartDesign/App/BodyPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/PartDesign/App/FeaturePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/PartDesign/Gui/ViewProviderPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/CommandPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/PathPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/FeaturePathCompoundPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/AreaPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/FeatureAreaPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/VoronoiPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/VoronoiCellPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/VoronoiEdgePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/App/VoronoiVertexPy.cpp -- area module (for Path Workbench) will be installed to: /usr/local/lib/freecad/lib -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/PathSimulator/App/PathSimPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/CAM/PathSimulator/AppGL/CAMSimPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Points/App/PointsPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Robot/App/Robot6AxisPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Robot/App/TrajectoryPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Robot/App/WaypointPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Robot/App/RobotObjectPy.cpp -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/SketchObjectSFPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/SketchObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/SketchGeometryExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/ExternalGeometryExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/GeometryFacadePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/ExternalGeometryFacadePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/ConstraintPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/App/SketchPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Sketcher/Gui/ViewProviderSketchGeometryExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Spreadsheet/App/SheetPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Spreadsheet/App/PropertySheetPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheetPy.cpp -- Found Microsoft.GSL: version 4.2.1 -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Surface/App/Blending/BlendPointPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Surface/App/Blending/BlendCurvePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Measure/App/MeasurementPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Measure/App/MeasureBasePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/Measure/Gui/QuickMeasurePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawHatchPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawPagePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewPartPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewSymbolPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawTemplatePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawParametricTemplatePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawSVGTemplatePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewClipPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewDimensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewDimExtentPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawGeomHatchPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewCollectionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawProjGroupPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawProjGroupItemPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawViewAnnotationPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawLeaderLinePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawRichAnnoPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/GeomFormatPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/CenterLinePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/CosmeticEdgePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/CosmeticVertexPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawTilePy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawTileWeldPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawWeldSymbolPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/CosmeticExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Mod/TechDraw/App/DrawBrokenViewPy.cpp -- Found Microsoft.GSL: version 4.2.1 -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/DocumentPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/PythonWorkbenchPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/ViewProviderPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/ViewProviderDocumentObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/ViewProviderGeometryObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/ViewProviderExtensionPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/WorkbenchPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/Selection/SelectionObjectPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/LinkViewPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/ViewProviderLinkPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/AxisOriginPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/CommandPy.cpp -- /exopi-obj/pobj/freecad-1.1.0/build-amd64/src/Gui/Navigation/NavigationStylePy.cpp -- Found GTest: /usr/local/lib/cmake/GTest/GTestConfig.cmake (found version "1.15.2") ============== System ============== -- bindir: /usr/local/lib/freecad/bin -- BLAS: -undefined- -- ccache: not enabled -- CMAKE_VERSION: 4.2.3 -- Compiler: /exopi-obj/pobj/freecad-1.1.0/bin/c++ (19.1.7) -- datadir: /usr/local/share/freecad -- docdir: /usr/local/share/doc/freecad -- includedir: include -- libdir: /usr/local/lib/freecad/lib -- prefix: /usr/local/lib/freecad -- Python: 3.14.4 [/usr/local/bin/python3.14] Suffix: [.abi3] ============== Config ============== -- BUILD_ADDONMGR: ON -- BUILD_ASSEMBLY: ON -- BUILD_BIM: ON -- BUILD_CAM: ON -- BUILD_CLOUD: OFF -- BUILD_DRAFT: ON -- BUILD_DRAWING: OFF -- BUILD_FEM: ON -- BUILD_GUI: ON -- BUILD_HELP: ON -- BUILD_IDF: ON -- BUILD_IMPORT: ON -- BUILD_INSPECTION: ON -- BUILD_JTREADER: OFF -- BUILD_MATERIAL: ON -- BUILD_MATERIAL_EXTERNAL: OFF -- BUILD_MEASURE: ON -- BUILD_MESH: ON -- BUILD_MESH_PART: ON -- BUILD_OPENSCAD: ON -- BUILD_PART: ON -- BUILD_PART_DESIGN: ON -- BUILD_PLOT: ON -- BUILD_POINTS: ON -- BUILD_REVERSEENGINEERING: ON -- BUILD_ROBOT: ON -- BUILD_SANDBOX: OFF -- BUILD_SHOW: ON -- BUILD_SKETCHER: ON -- BUILD_SMESH: ON -- BUILD_SPREADSHEET: ON -- BUILD_START: ON -- BUILD_SURFACE: ON -- BUILD_TECHDRAW: ON -- BUILD_TEST: ON -- BUILD_TUX: ON -- BUILD_VR: OFF -- BUILD_WEB: ON -- CMAKE_BUILD_TYPE: Release -- CMAKE_CXX_FLAGS: -Wall -Wextra -Wpedantic -Wno-write-strings -fdiagnostics-color -O2 -pipe -g -Wno-undefined-var-template -- CMAKE_CXX_STANDARD: 20 -- CMAKE_INSTALL_PREFIX: /usr/local/lib/freecad -- CMAKE_PREFIX_PATH: OFF -- ENABLE_DEVELOPER_TESTS: ON -- FREECAD_CREATE_MAC_APP: -undefined- -- FREECAD_LIBPACK_USE: -undefined- -- FREECAD_QT_VERSION: 6 -- FREECAD_USE_EXTERNAL_KDL: OFF -- FREECAD_USE_EXTERNAL_SMESH: OFF -- FREECAD_USE_FREETYPE: ON -- FREECAD_USE_PYSIDE: ON -- FREECAD_USE_SHIBOKEN: ON -- Python3_EXECUTABLE: /usr/local/bin/python3.14 -- PYTHON_LIBRARY: -undefined- -- USE_CUDA: -undefined- -- USE_OPENCV: -undefined- ============== Libraries ============== -- Boost: 1.89.0 -- Coin3D: 4.0.8 [optimized;Coin;debug;Coin] [/usr/local/include] -- Coin3D_DOC: not found -- DesignerPlugin: not built (BUILD_DESIGNER_PLUGIN is OFF) -- Doxygen: not found -- Eigen3: 3.4.0 -- fmt: 11.2.0 -- Freetype: 2.14.2 -- HDF5: 1.14.6 -- ICU: 78.3 -- Matplotlib: 3.10.8 PathDirs: /usr/local/lib/python3.14/site-packages/matplotlib -- MEDFile: 5.0.0 [/usr/local/lib/libmedC.so.0.0;/usr/local/lib/libmed.so.0.0] [/usr/local/include] -- NETGEN: 6.2.2602 (6.2.2602) [-DNO_PARALLEL_THREADS;-DOCCGEOMETRY;-DNETGEN_VERSION=396330] [] [/usr/local/include/netgen/include;/usr/local/include/netgen] [nglib] [/usr/local/include/netgen/include;/usr/local/include/netgen] -- OCC: 7.9.3 [/usr/local/lib] [/usr/local/include/opencascade] -- OCC_Libs: [TKFillet;TKMesh;TKernel;TKG2d;TKG3d;TKMath;TKShHealing;TKXSBase;TKBool;TKBO;TKBRep;TKTopAlgo;TKGeomAlgo;TKGeomBase;TKOffset;TKPrim;TKHLR;TKFeat;TKExpress;TKDESTEP;TKDEIGES;TKDEGLTF;TKDESTL] -- OpenGL_Lib: [/usr/X11R6/lib/libGL.so.19.2] -- OpenGLU_Incl: [/usr/X11R6/include] -- OpenGLU_Lib: [/usr/X11R6/lib/libGLU.so.9.0] -- pivy: 0.6.11 -- pybind11: 3.0.3 -- PYCXX: 7.1.11 Incl: /exopi-obj/pobj/freecad-1.1.0/src/3rdParty/PyCXX Src:/exopi-obj/pobj/freecad-1.1.0/src/3rdParty/PyCXX/CXX -- PySide: 6.10.2 [/usr/local/include/PySide6] -- PySideTools: v: 6 uic: [/usr/local/lib/qt6/libexec/uic] rcc: [/usr/local/lib/qt6/libexec/rcc] -- QtConcurrent: 6.10.2 -- QtCore: 6.10.2 -- QtNetwork: 6.10.2 -- QtOpenGL: 6.10.2 -- QtOpenGLWidgets: 6.10.2 -- QtPrintSupport: 6.10.2 -- QtSvg: 6.10.2 -- QtTest: 6.10.2 -- QtUiTools: 6.10.2 -- QtWidgets: 6.10.2 -- QtXml: 6.10.2 -- Rift: not enabled (BUILD_VR) -- Shiboken: 6.10.2 [/usr/local/include/shiboken6;/usr/local/include/python3.14] -- SMESH: 7.7.1.0 build internal -- SPNAV: not found -- SWIG: 4.4.1 -- Vtk: 9.6.0 -- XercesC: 3.3.0 [/usr/local/lib/libxerces-c.so.2.0] [/usr/local/include] -- yaml-cpp: 0.8.0 -- ZLIB: 1.3.2 ================================================= Now run 'cmake --build /exopi-obj/pobj/freecad-1.1.0/build-amd64' to build FreeCAD ================================================= -- Configuring done (100.0s) CMake Error at /usr/local/lib/cmake/vtk/VTK-targets.cmake:97 (set_target_properties): The link interface of target "VTK::scn" contains: scn::scn but the target was not found. Possible reasons include: * There is a typo in the target name. * A find_package call is missing for an IMPORTED target. * An ALIAS target is missing. Call Stack (most recent call first): /usr/local/lib/cmake/vtk/vtk-config.cmake:148 (include) cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:31 (find_package) CMakeLists.txt:96 (SetupSalomeSMESH) -- Generating done (7.6s) CMake Generate step failed. Build files cannot be regenerated correctly. *** Error 1 in cad/freecad (/exopi-cvs/ports/infrastructure/mk/bsd.port.mk:3024 'do-configure': @cd /exopi-obj/pobj/freecad-1.1.0/build-amd6...) *** Error 2 in cad/freecad (/exopi-cvs/ports/infrastructure/mk/bsd.port.mk:3044 '/exopi-obj/pobj/freecad-1.1.0/build-amd64/.configure_done') *** Error 2 in cad/freecad (/exopi-cvs/ports/infrastructure/mk/bsd.port.mk:2706 'configure': @lock=freecad-1.1.0; export _LOCKS_HELD=" free...) ===> Exiting cad/freecad with an error *** Error 1 in /exopi-cvs/ports (infrastructure/mk/bsd.port.subdir.mk:144 'configure': @: ${echo_msg:=echo}; : ${target:=configure}; for i...) >>> Ended at 1779079695.47 max_stuck=60.64/waiting-for-lock #182=33.56/depends=68.16/show-prepare-results=6.30/patch=6.77/configure=108.79 Error: job failed with 512 on exopi-2 at 1779079695